PREMIUM cut-off wheels

for rail cutting

High-performance tool for clean and guided freehand cutting of rails. Suitable for all common hand cutting machines. Difficult application conditions such as humidity, cold or extreme temperature fluctuations cannot harm this PREMIUM cut-off wheel. Even in extreme situations, it guarantees clean and bright cutting areas without the need for time-consuming rework. In addition to handheld cut-off machines with gasoline or electric motors, this tool can also be used on powerful stationary machines. Show more Show less

  • The product offers the shortest cutting times with minimal exertion: even with humidity, cold and temperature fluctuations
  • Cleanest surfaces without any discolouration reduce rework and working times
  • Maximum lifetime and stability
  • Also suitable for powerful (over 5 kW) stationary machines

STANDARD cut-off wheels

for rail cutting

Powerful tool for pure and guided freehand cutting of rails. Suitable for all common hand cutting machines. This STANDARD cut-off wheel is an economical solution when it comes to cutting rails using gasoline or electric petrol saws. Applicable in extreme conditions, it combines stability and a very good lifetime with cutting ability and short working hours. Moreover, this tool can be used on powerful stationary machines. Show more Show less

  • The product offers shortened cutting times with minimal exertion: even with humidity, cold and temperature fluctuations
  • Clean surfaces without any discolouration and reduce rework and working times
  • Very good lifetime and stability
  • Also suitable for powerful (over 5 kW) stationary machines

PREMIUM CERABOND X cut-off wheels

for cast iron

High performance tool for cutting various cast materials. Suitable for all common angle grinders. The well-known CERABOND X cut-off wheel from Tyrolit has now been specially adapted and optimized for cutting a wide variety of cast materials, such as spheroidal cast iron or cast iron with lamellar graphite. The new bond system efficiently prevents premature grain break-out, allowing you to achieve an incredible lifetime on cast materials with CERABOND X cut-off wheels. Due to the use of high-quality ceramic abrasive grains, you are guaranteed maximum aggressiveness throughout the lifetime. The high cutting ability of the cut-off wheels allows the operator to work very comfortably with little effort, which makes working with cast iron much easier. Particularly clean and bright cutting areas reduce rework and working hours, thus supporting the most economical work processes. Show more Show less

  • Excellent lifetime and stability
  • Cleanest surfaces without any discolouration reduce rework and working times
  • Shortest cutting times and comfortable working with low effort
  • Highest aggressiveness over the entire lifetime

PREMIUM CERABOND X cut-off wheels

for rail cutting

High performance tool for guided freehand cutting of rails. Suitable for hand cutting machines with electric or petrol motor. The new CERABOND X cut-off wheel was specially developed for cutting rails and skilfully defies the most adverse application conditions. The new bond system prevents premature grain break-out, allowing you to achieve incredible standing times with CERABOND X cut-off wheels. High-quality ceramic abrasive grains guarantee maximum aggressiveness over the entire lifetime. Even under extreme application conditions such as humidity, cold and temperature fluctuations, the rail cut-off wheel from Tyrolit offers the shortest cutting times with little effort. Particularly clean and bright cutting areas reduce rework and working hours, thus supporting the most economical work processes. Show more Show less

  • Shortest cutting times and comfortable working with low effort
  • Very long service life and stability
  • Cleanest surfaces without any discolouration reduce rework and working times
  • Best results even with humidity, cold and temperature fluctuations

Cut-off wheels

for cast iron

Specially designed cut-off wheel for the machining of cast iron. Suitable for all common angle grinders. The cut-off wheels have been specially developed for application on cast iron and are characterized by an optimum balance of operator friendliness and lifetime. This is not least due to the specially developed mixture of aluminum oxide and silicon carbide grains. This tool is particularly suitable for machining ductile iron pipes and other soft metals. Show more Show less

  • Balance of lifetime and user friendliness
  • Special grain mixture
  • High aggressiveness

PREMIUM FOCUR SA cut-off wheels

for grey and spheriodal cast iron

Specially developed highest performance tools for cutting gray and spheroidal cast iron. Suitable for all common 230mm angle grinders. The PREMIUM FOCUR SA is a diamond cut-off wheel and your ideal partner for machining gray and spheroidal cast iron. Compared to ordinary resin cut-off wheels, this tool offers up to 25 times longer standing time. Benefit from the exceptional aggressiveness of this wheel, which is achieved not least through the use of diamond grit. Show more Show less

  • DIN 13236 safety norm
  • Highest aggressiveness with unbelievable lifetime thanks to an innovative production technology and the use of diamond grains
  • Up to 25 times higher lifetime compared to vitrified bonded tools

PREMIUM cut-off wheels

for cast iron

Highest performance tools for machining various cast materials. Suitable for all common 230mm angle grinders. The PREMIUM cut-off wheel was specially developed for comfortable work on all cast materials. Thanks to an innovative manufacturing technology combined with the use of a high quality zirconium aluminium oxide, this tool has an exceptional cutting ability. The cut-off wheel is available in 3 different hardnesses - so you are well equipped for any application on castings. Show more Show less

  • Highest aggressiveness thanks to innovative production technology
  • New bond system combined with high-quality zircon corundum enables shortest cut-off times
  • Maximum comfort when machining the hardest workpieces
  • Best lifetime for economical work

SECUR cut-off wheels

The innovative solution for cut-off grinding

Cut-off grinding – a cutting process with undefined edges – is frequently used in steel mills due to its excellent performance and economic efficiency. With SECUR, TYROLIT offers the ideal tool for every cutting application. Available with a diameter of up to 2,000 mm.

  • Optimises your process costs
  • Enables innovative customised solutions
  • Achieves the best cutting quality
  • Ultimate product safety

SECUR XT

The thinnest conical cut-off wheel

Competence in cutting and grinding - this is what has distinguished Tyrolit for more than one hundred years. Our extensive know-how in the development of cut-off wheels makes us the market-leading supplier in the steel industry. The innovative design of the SECUR EXTRA THIN enables a further reduction of the wheel thickness by up to 20% compared to the SECUR SUPER THIN cut-off wheel and by 36% compared to the SECUR cut-off wheel. Show more Show less

  • Cost savings
  • Customer solutions
  • Reduced energy demand
  • Conical shape

SECUR SUPER THIN

Super thin, super sharp!

The innovative wheel design enables a wheel thickness that is reduced by approx. 20% and is therefore particularly suitable for low-performance machines. Available with a diameter of up to 2,000 mm.

  • High wheel stability
  • For low-performance machines
  • Minimal cutting losses

SECUR EASY CUT

Cut-off wheels in the steel industry for materials with high internal stresses

TYROLIT has developed the SECUR Easy Cut product line with the specific aim of increasing process stability when cutting large workpieces in materials with high internal stresses. The unique combination of conical wheel shape and a completely re-defined wheel topography – with particularly easy cutting side surfaces – reduces the risk of jamming during cutting.

  • Reduced risk of jamming
  • White cut
  • Maximum process stability

SECUR LAB

Laboratory cut-off wheels for metallurgical sample material

The first work step of materialographic sample preparation is cutting the sample, which must be done as quickly as possible and must not cause irreparable damage to the sample. This means no thermal structural alterations, no deformation, no cracks. With SECUR LAB we offer the ideal cut-off wheel for a variety of materials, workpiece dimensions and hardnesses.

  • A smooth cut
  • Precise cutting areas
  • Clean cut-off surfaces
  • High resistance to cooling lubricants
  • Colour coded wheels

SECUR-EXTRA cut-off wheels

The innovative solution for cut-off grinding

SECUR-EXTRA is tough on every casting challenge. This range was developed specially for the harsh requirements of the foundry industry. With its zirconia alumina combined with new bond systems, it ensures optimum cutting ability, low vibration, a long lifetime and the best price-performance ratio for your cutting process. Special production processes and extensive technical safety tests guarantee maximum working safety combined with operating speed and cutting performance. Common operating speeds are 80 m/s and 100 m/s. Show more Show less

  • Maximum product quality
  • Long service life
  • Optimum cutting quality

FOCUR-EXTRA cut-off wheels

Cutting castings with the angle grinder

FOCUR-EXTRA is tough on every casting challenge. This range was developed specially for the harsh requirements of the foundry industry. With its zirconia alumina combined with new bond systems, it ensures optimum cutting ability, low vibration, a long lifetime and the best price-performance ratio for your cutting process.

  • Less effort required through high cutting ability
  • Clean cutting quality
  • Long lifetime
  • Produced according to stringent quality standards
  • Ultimate product safety

FOCUR SA

Diamond cut-off wheel for grey and spheriodal cast iron

FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cut-off wheels are available in diameters from 178 to 600 mm.

  • Lifetime
  • Economic efficiency
  • Working convenience
  • Quality

PREMIUM FOCUR SA cut-off wheels

for grey and spheriodal cast iron

Specially developed diamond high-performance cut-off wheel for stationary cutting of workpieces made of gray and spheroidal cast iron. Suitable for all common stationary cutting machines. The PREMIUM FOCUR SA diamond saw blade is your ideal partner for stationary machining of gray and spheroidal cast iron. Compared to ordinary resin cut-off wheels, this tool offers up to 25 times longer standing time. Benefit from the exceptional aggressiveness of this wheel, which is achieved not least through the use of diamond grit. Show more Show less

  • DIN 13236 safety norm
  • Highest aggressiveness with unbelievable lifetime thanks to an innovative production technology and the use of diamond grains
  • Up to 25 times higher lifetime compared to vitrified bonded tools

DCCI Diamond cut-off wheel

for grey and spheroidal cast iron

DCCI diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cutting discs are specially designed for slow-rotating machines.

PREMIUM cut-off wheels

for guided off-hand cutting of rails

High-performance tool for guided freehand cutting of rails. To be used only with appropriate clamping device. If you are looking for an even easier cutting ability and durable cut-off wheel, you will find it in this PREMIUM product. Thanks to the added zirconium aluminium oxide, the tool offers even more performance and aggressiveness. These special rail cut-off wheels may only be used with the appropriate clamping device, attached to the rail, in guided freehand cutting. Never use in pure freehand application. Show more Show less

  • Maximum abrasiveness and lifetime
  • The zirconium aluminium oxide grain gives the wheel especially good cutting ability and improves performance for the operator
  • Reduced load

PREMIUM rail cut-off wheels with universal bore

for rail cutting

High performance tool for clean and guided freehand cutting of rails. Suitable for all common hand cutting machines. The special feature of this PREMIUM rail cut-off wheel is its integrated reduction bush, which allows it to be used on machines with 20 mm and 25.4 mm mounting. In addition, it is comfortable in application and at the same time enormously easy cutting and durable, even under extreme application conditions. Therefore, it is an ideal tool for the experienced rail professional for efficient cutting using petrol saw. Show more Show less

  • Integrated reduction bush enables use on machines with 20 mm and 25.4 mm spindle
  • Hard specification for increased lifetime and improved cutting performance
  • Cleanest surfaces without any discolouration reduce rework and working times
  • Very comfortable working without great effort