Materials able to be machined: universal building materials, such as concrete, natural stone, clay brick, cellular concrete, etc. The DCU*** 4in1 dry cutting saw blade impresses with excellent results when cutting concrete, hard stone, abrasive materials and steel. The possibility for universal use offers the user a product which is ready-to-use at any time without a wheel change and ensures the successful completion of a project. Show more Show less

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

Materials able to be machined: universal building materials, such as concrete, clay brick, natural stone, steel, etc.

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

Materials able to be machined: Concrete, clay brick, cellular concrete. Details: tool for the milling of slots in concrete and masonry. For use with all common wall chasers.

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

Materials able to be machined: Concrete blocks, granite, gneiss, porphyry, paving slab, etc. Details: the DCH*** dry cutting saw blade, specially developed using TGD®-technology for hard stone, impresses with its cutting ability and smooth running. Reduced effort over the entire lifetime allows for higher productivity. The perfectly optimised segments for the application create very clean, chip-free edges and ensure a flawless result. Show more Show less

Materials able to be machined: Granite, gneiss, porphyry, paving slab, hard limestone, etc.

The DCH***-FC from TYROLIT enables the user to carry out cutting work swiftly and to precise dimensions, without any great exertion. The DCH*** - FC is an ultra-thin diamond cut-off wheel with a segment thickness of 1.2 or 1.9 mm. It is distinguished by an extremely high cutting ability with minimal dust generation and extremely smooth running.

Materials able to be machined: granite, porphyry, paving slab, hard limestone, etc.

Materials able to be machined: abrasive concrete, cellular concrete, floor pavement, plaster, pumice stone, etc.

Materials able to be machined: mortar joints. Details: tool for milling and repairing mortar joints.

Materials able to be machined: abrasive concrete, cellular concrete, floor pavement, plaster, pumice stone, etc.

Materials able to be machined: marble, fibreglass reinforced plastic, PVC, carbon fibre, composites, fibreglass, bulletproof glass, etc. Details: with electroplated coating, also suitable for rescue operations.

Materials able to be machined: ceramic tile, fine stoneware, porcelain. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

Materials able to be machined: ceramic tiles.

The TYROLIT roofer's cutting wheel was specially developed for the wide ranging roofing application scenarios and is suitable for cutting all common roofing materials – from concrete and clay roof tiles through to fibre cement. The ribbed cutting rim and the hardened steel core ensure minimum cutting pressures and clean straight cuts throughout the wheel life.

FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cutting discs are specially designed for slow-rotating machines and are only available in diameters of 350 mm.

The new cutting and chamfering disc DCCI*** Combi has been especially developed for the treatment of plastic pipes. The galvanized cutting edge and the diamond-coated chamfering enable a constant and clean cutting and chamfering at the same time. A cutting depth stop serves as an additional aid.