MIRA ULTRA

Vitrified bonded worm grinding wheels for continuous generating grinding of gears

TYROLIT has developed the MIRA Ultra product line specifically for the continuous generating grinding of gears. All specifications are produced without the addition of sintered aluminium oxide and combine outstanding performance data with optimum economic efficiency. The innovative grinding wheel structure was specially designed for operating speeds of up to 100 m/s and allows reliable operation on modern high-speed machines.

  • Higher operating speed
  • Maximum process stability
  • Extremely rapid availability
  • The best economic efficiency
  • Cool polished section

PREMIUM*** flap disc

LONGLIFE for steel

The PREMIUM*** LONGLIFE is a high-performance flap disc for steel and boasts an excellent stock removal rate and the longest lifetime. A stock removal rate of more than 4000g opens up a completely new dimension. A natural fibre core gives the tool additional flexibility, meaning that the PREMIUM*** LONGLIFE fits the workpiece surface perfectly and creates clean grinding transitions. Show more Show less

  • Great savings potential
  • Environmentally-friendly
  • Unparalleled performance

PREMIUM*** rough grinding wheel

LONGLIFE for steel

The PREMIUM*** LONGLIFE is a high-performance rough grinding wheel for surface and edge grinding. It is distinguished by its excellent lifetime. The 7, 8 and 10 mm thick LONGLIFE rough grinding wheels also provide enhanced dimensional stability during welding. The 4 mm thick LONGLIFE rough grinding wheel has been especially developed for use in pipeline construction and for fillet welding. Show more Show less

  • High economic efficiency
  • High stock removal rate
  • Environmentally-friendly

PREMIUM*** resin cup wheel

For steel

Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The PREMIUM*** cup wheel for steel is ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

  • High productivity
  • Universal use
  • Broad assortment

PREMIUM*** resin bonded mounted points

For stainless steel

The PREMIUM*** resin mounted points have a vibration reducing effect due to their composition and therefore boast low impact sensitivity. Due to their special quality, these points are best suited to deburring, bevelling and edge breaking on stainless steel. Due to their bond, they are specially suited to INOX materials. Maximum operating speed: 50 m/s Show more Show less

  • High level of comfort
  • Versatile
  • High economic efficiency

PREMIUM*** SHIELD cup brushes

For steel

With SHIELD cup brushes, TYROLIT offers a protective coating against dust and wire breakages combined with user-friendly use. The transparent protection allows the operator an unrestricted view of the workpiece even when performing edge and corner grinding. In addition, the plastic flaps offer a high level of flexibility, making it possible to machine difficult-to-reach places. SHIELD brushes are available in various designs and wire types, and offer the highest safety levels when working on steel. Applications. Our products are also frequently used to clean welding seams. Show more Show less

  • Enhanced user safety
  • Broad assortment
  • No restriction

PREMIUM*** wire brushes

For steel

Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Twisted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. These wire brushes are characterised by their high level of flexibility. The wire brush opens due to centrifugal force. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Wire brushes with plastic achieve a longer lifetime. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

PREMIUM*** round brushes

For steel

Round brushes for floorstanding grinders. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

  • Broad assortment
  • Versatile tool
  • Highest quality

PREMIUM*** universal hand brushes

For steel

TYROLIT hand brushes are suitable for practically any application. This tool enables the deburring and cleaning of welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less

  • Versatile tool
  • Broad assortment
  • Highest quality

PREMIUM*** Wet drilling bits

CDL*** | in TGD®-technology (from Ø 47 mm)

Drill motors up to 3 kW | soft to medium-hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill from Ø 47 mm with TGD®-technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 250 mm for maximum safety.

  • Consistently very fast cutting performance and noticeable smooth running.
  • Long lifetime.

PREMIUM*** RONDELLER®

2in1 for steel and stainless steel

The TYROLIT PREMIUM*** RONDELLER® combines the product advantages of different grinding tools with the easiest handling. The unique geometry of the Rondeller® enables cool, ergonomic grinding that is kind to materials. Absolutely vibration-free use and optimal adaptation to the workpiece for all grinding, deburring and shaping applications means that curved surfaces can be perfectly machined. Show more Show less

  • High level of comfort while working
  • Universal use
  • Simple handling

PREMIUM*** grinding wheels

1F80 for steel

The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. Using the wheel, flutes and notches can be added, and gears can be deburred. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less

  • Universal use
  • Enhanced economic efficiency
  • Highest quality

PREMIUM*** tungsten carbide burrs

For cast iron, steel and stainless steel

Production of the TYROLIT PREMIUM*** burrs is performed on modern CNC grinding machines. The result is a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less

  • Universal use
  • Various applications
  • Broad assortment

PREMIUM*** cut-off wheels

Super-thin LONGLIFE cut-off wheels for steel

The next generation of TYROLIT PREMIUM*** cut-off wheels achieves a better performance than other PREMIUM wheels, and with considerably reduced tool wear. In thicknesses of 1.0 to 1.6 mm, these super-thin cut-off wheels are suitable for all types of steel and impress with exceptional results without compromise. As well as a clear improvement in productivity, these cut-off wheels also promote environmentally friendly use thanks to reduced waste production. Show more Show less

  • Enhanced economic efficiency
  • Maximum comfort while working
  • Reduced working times

PREMIUM*** cut-off wheels

For steel

The quality of the PREMIUM*** cut-off wheel ensures the longest lifetime and cost-effective operation. By using the grit size 100, a particularly low burr result is achieved. The cut-off wheel in small diameters is designed for use on straight grinders. This tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Show more Show less

  • Reduced working times
  • Versatile
  • Enhanced work safety

PREMIUM*** cut-off wheels

For steel

TYROLIT provides the optimal tools for use on large cut-off machines in trade and industry. These include the PREMIUM*** cut-off wheel for steel in large diameters. This special tool is ideal for cutting workpieces with large cross-sections. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Low cutting costs
  • Reduced load
  • Reduced working times

PREMIUM*** cut-off wheels

For steel

TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. These include the PREMIUM*** cut-off wheel for steel in diameters from 300 to 500 mm. This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Show more Show less

  • Broad assortment
  • Universal use
  • Reduced working times

PREMIUM*** rough cleaning wheel

Universal use

With the TYROLIT rough cleaning wheel you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. At the same time, they prevent clogging or loading of the wheel. This wheel offers the user quiet, non-strenuous grinding combined with low generation of heat. Show more Show less

  • Versatile tool
  • Powerful
  • User-friendly

PREMIUM*** rough cleaning wheel

Universal use

With the TYROLIT rough cleaning wheel you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. At the same time, they prevent clogging or loading of the wheel. This wheel offers the user quiet, non-strenuous grinding combined with low generation of heat. When using the longer clamping spike, two 1GR can be clamped providing a greater contact area and faster progress. Show more Show less

  • Versatile tool
  • Powerful
  • User-friendly

PREMIUM*** CONDITIONING

For steel and stainless steel

With the PREMIUM*** CONDITIONING wheel you can remove all rough scratch marks from the surface before commencing the polishing process. The three-dimensional flap design reduces clogging of the wheel to a minimum. Using the wheel also prevents discolouration on the workpiece caused by high heat build-up. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less

  • Universal use
  • Reduced working times
  • The best results

PREMIUM*** JUTE disc

For steel and stainless steel

The TYROLIT JUTE disc is a new, unique grinding wheel that combines abrasiveness with a high level of comfort while working. This tool can be used on both steel and stainless steel. The longest lifetime and an environmentally friendly jute fibre core deliver the best performance. An additional back up pad is not required, as there is already one integrated in the product. The natural fibre core can be trimmed, giving it the edge over other discs in terms of its lifetime. This saves the user time and great expense. Show more Show less

  • Longest lifetime
  • Extremely high stock removal rate
  • Environmentally-friendly

PREMIUM*** SCM

Universal use

With the new TYROLIT SCM program, we are now taking a further step towards economic efficiency. With SCM, the machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. Another advantage of SCM lies in the deburring of tool edges without additional stock removal. Furthermore, the TYROLIT SCM program is yielding the best results in terms of lifetime, which in turn is evidence of the economic efficiency of these products. Show more Show less

  • Reduces working times
  • Noticeable cost reduction
  • One disc, three options

PREMIUM*** fleece flap wheels spindle mounted

For steel, stainless steel and nonferrous metals

TYROLIT spindle-mounted fleece flap wheels are highly adaptable and ensure that no changes occur to the surface integrity. The TYROLIT Premium*** assortment has now been extended by 29 types in order to be able to offer you different grains and new dimensions. Different surface structures and roughnesses can be achieved through the variety of grain gradings. TYROLIT spindle-mounted fleece flap wheels are also available with inlaid coated abrasive, so that higher stock removal can be achieved and a coarser surface integrity created. Show more Show less

  • Versatile assortment
  • Less work required
  • Universal use

PREMIUM*** mini belts

For steel, stainless steel and aluminium

The Premium*** belts have been specially designed for the mini belt grinder and prevent grain break outs on the tool due to their special curvature. A good stock removal rate and long lifetime allow consistent results to be delivered in shorter working hours. Our belts are easy to handle and mount. TYROLIT mini belts can be used on all steel, stainless steel and nonferrous metals. Show more Show less

  • Reduced working times
  • Universal use
  • Broad assortment

PREMIUM* paper rolls

For steel, nonferrous metals, wood, paints and lacquers

The special feature of the PREMIUM*** paper rolls is a latex-finished backing, which makes them ideal for wet and dry applications. This is the perfect product for preparing and machining metal, wood, paint and lacquer. The closed coating of the PREMIUM*** paper roll delivers an excellent surface finish. Show more Show less

  • Broad assortment
  • PREMIUM quality
  • Versatile application

PREMIUM*** paper sheets

For steel, nonferrous metals, wood, paints and lacquers

The special feature of the PREMIUM*** paper sheets is a latex-finished backing, which makes them ideal for wet and dry finishing. This is the perfect product for preparing and machining metal, wood, paint and lacquer. The closed coating of the PREMIUM*** paper sheets delivers an excellent surface finish. Show more Show less

  • Broad assortment
  • PREMIUM quality
  • Flexible

PREMIUM*** TFC

Universal use

TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. A unique, strong paper backing combined with zirconium makes this product extremely abrasive and durable, and active coolants enable cool, clean grinding to be performed on the workpiece. Thanks to the thin fibre backing with grit 40 and strong paper backing the TFC is the optimal tool for removing smaller welding and spot weld seams. Show more Show less

  • Universal use
  • Simple handling
  • Reduced working times

PREMIUM*** QUICK CHANGE DISC

For steel

With TYROLIT QUICK CHANGE DISCS you can save time and thus increase productivity. They provide easy handling and can be used without the need for any additional mounting tools. These QUICK CHANGE DISCS are specially designed for general grinding tasks on steel. Our two different types cover the main mounting systems. Show more Show less

  • Very long lifetime
  • Less work required
  • Broad assortment

PREMIUM*** rollers

For steel, stainless steel and nonferrous metals

PREMIUM*** rollers are used on burnishing machines for general grinding processes, cleaning, finishing and for polishing uneven or curved surfaces. As the wear pattern remains stable throughout the product lifetime, a consistent high-quality surface finish is delivered. The comprehensive assortment offers products for removing welding tracks, scratches and oxidation residue, as well as for pre-treating surfaces. Show more Show less

  • Consistent results
  • Universal use
  • Broad assortment

PREMIUM*** rollers

For steel, stainless steel and nonferrous metals

PREMIUM*** rollers for bench grinders can be used for general grinding processes, including cleaning, finishing and for polishing uneven or curved surfaces. As the wear pattern remains stable throughout the product lifetime, a consistent high-quality surface finish is delivered. The comprehensive assortment offers products for removing welding tracks, scratches and oxidation residue, as well as for pre-treating surfaces. Show more Show less

  • Consistent results
  • Universal use
  • Broad assortment

PREMIUM*** spiral belts

For steel, stainless steel and aluminium

TYROLIT spiral belts are used for fine grinding and deburring work, as well as shaping complex workpieces. The combination of zirconium and an additional coolant enables them to be used on many different materials. The variety of grit sizes available means they can be used for very high stock removal or fine grinding. The spiral belts can easily be mounted on an axle or an expandable mandrel. Accessories also form part of our assortment. Show more Show less

  • Broad assortment
  • Easy handling
  • Above-average grinding duration

HYLAS

New concept of grinding glass for double edger machines with peripheral wheels.

With Hylas, TYROLIT introduces a new line of wheels for grinding furniture and technical glass. The most significant benefits are: fast startup, high speed, excellent quality finishing as well as extreme flexibility of use. HYLAS allows the same wheel to be installed on different double edging machines, regardless of the type of machine fitting, thanks to the simple use of suitable adaptors. Hylas has also been designed to never need reprofiling and thus offers the advantage of working always with a new grinding wheel.

  • Fast startup
  • Machine set up minimized
  • Maximum performance
  • Increased productivity
  • Economic advantage

MIRA DDS

Dressing wheels for dressing worm grinding wheels

The dressing of cylindrical worm grinding wheels for continuous grinding is performed using rotating diamond dressing tools. With the MIRA DDS (Diamond Dressing System) product line, TYROLIT offers a first-class solution for this application. As well as single cone dressers, profile rollers, full profile roller with multiple ribs and composite profile rollers, individual customised solutions are also available. MIRA DDS dressing wheels are manufactured using a positive electroplating process or using a reverse process. Show more Show less

  • High precision
  • Dressing behaviour that allows easy cutting
  • System solution with MIRA/MIRA ULTRA worm grinding wheels

PREMIUM*** flap disc

For steel

The PREMIUM*** flap disc for steel is a versatile professional tool suitable for universal grinding tasks. With this disc, users will achieve perfect surfaces on steel, as well as the best results for surface or edge grinding and deburring work. The supporting disc is made of rigid fibre glass and is therefore ideally suited to use on powerful angle grinders. Show more Show less

  • Refined surface profile
  • Good price- performance ratio
  • The best results

PREMIUM*** rough grinding wheel

CERABOND 2in1 for steel and stainless steel

The TYROLIT CERABOND system brings almost 100 years of experience to a new generation of highest performance tools. With the rough grinding wheels from the CERABOND family, we have succeeded in achieving an ideal combination of specially treated ceramic grain and bond structure. Thus it is possible to keep the abrasiveness and the lifetime of the wheel at the highest level. The unique bond system prevents premature grain break-out in order to guarantee the full grinding power of the individual grains. This rough grinding wheel is particularly suitable for steel and stainless steel applications. Show more Show less

  • Shorter work processes
  • Lower production costs
  • Improved productivity

PREMIUM*** resin cup wheel

For Inox

Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The PREMIUM*** cup wheel specially designed for stainless steel is also ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

  • High productivity
  • Universal use
  • Optimum results

PREMIUM*** resin bonded mounted points

For cast iron

The PREMIUM*** resin mounted points (dark brown) have a vibration reducing effect due to their composition and therefore boast low impact sensitivity. Due to their special quality, these points are best suited to deburring, bevelling and edge breaking on cast iron materials. Due to their bond, they are specially suited to casting. Maximum operating speed: 50 m/s Show more Show less

  • High level of comfort
  • Versatile
  • High economic efficiency

PREMIUM*** SHIELD cup brushes

For stainless steel

With SHIELD cup brushes, TYROLIT offers a protective coating against dust and wire breakages combined with user-friendly use. SHIELD brushes are available in various designs and wire types, and offer the highest safety levels when working on steel. Applications. Our products are also frequently used to clean welding seams. The transparent protection allows the operator an unrestricted view of the workpiece even when performing edge and corner grinding. In addition, the plastic flaps offer a high level of flexibility, making it possible to machine difficult-to-reach places. Show more Show less

  • Enhanced user safety
  • Broad assortment
  • No restriction

PREMIUM*** wire brushes

For stainless steel

Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Twisted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. These wire brushes are characterised by their high level of flexibility. The wire brush opens due to centrifugal force. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

PREMIUM*** round brushes

For stainless steel

The versatile round brushes for floorstanding grinders are used in a variety of industries. These wire brushes with knotted wire can be used to remove rust and paint, as well as for fine grinding. They also come in useful for polishing and matting stainless steel workpieces. TYROLIT wire brushes are manufactured to the highest standards to make work for the operator easier and safer. Show more Show less

  • Powerful tool
  • Versatile tool
  • Highest quality

PREMIUM*** universal hand brushes

For stainless steel

These brushes are stainless steel specialists when it comes to deburring and cleaning welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less

  • Versatile tool
  • Broad assortment
  • Highest quality

PREMIUM*** Wet drilling bits

CDL***-C2 | in TGD®-technology (from Ø 82 mm)

Drill motors up to 3 kW | soft to medium-hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill from Ø 82 mm with TGD®-technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 250 mm for maximum safety.

  • Consistently very fast cutting performance and noticeable smooth running.
  • Long lifetime.

PREMIUM*** RONDELLER®

For stone

The TYROLIT PREMIUM*** RONDELLER® combines the product advantages of different grinding tools with the easiest handling. The unique geometry and stud pattern of the RONDELLER® enables ergonomic grinding that protects materials. Absolutely vibration-free use and optimal adaptation to the workpiece for all grinding jobs means that curved surfaces can be perfectly machined. Show more Show less

  • High level of comfort while working
  • Universal use
  • Simple handling

PREMIUM*** grinding wheels

1F80 for stainless steel

The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. Using the wheel, flutes and notches can be added, and gears can be deburred. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less

  • Universal use
  • Enhanced economic efficiency
  • Highest quality

PREMIUM*** tungsten carbide burrs

For nonferrous metals

Production of the TYROLIT PREMIUM*** burrs is performed on modern CNC grinding machines. The result is a highly efficient precision tool that has been specially developed for use on nonferrous metals. With these products you can achieve the longest lifetimes. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less

  • High stock removal rate
  • Special use
  • Broad assortment

PREMIUM*** cut-off wheels

Super-thin 2in1 cut-off wheels for steel and stainless steel

With the next generation PREMIUM*** 2in1 cut-off wheels you can enhance performance while significantly reducing tool wear. In thicknesses of 1.0 to 1.6 mm, these super-thin 2in1 cut-off wheels have been developed for machining steel and stainless steel. The chemical purity makes this tool ideal for machining stainless steel. In this way, impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength, can be avoided. As well as a clear improvement in productivity, these cut-off wheels also promote environmentally friendly use thanks to reduced waste production. Show more Show less

  • Enhanced economic efficiency
  • Maximum comfort while working
  • Reduced working times

PREMIUM*** cut-off wheels

For stainless steel

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The PREMIUM*** cut-off wheel in small diameters is designed for use on straight grinders. This tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Show more Show less

  • Maximum economic efficiency
  • Stainless steel specialist
  • Enhanced work safety

PREMIUM*** cut-off wheels

For rails

This wheel has been developed specially based on specifications for cutting rails. Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the rail cut-off wheel from TYROLIT offers short cutting times coupled with minimal effort. Exceptionally clean, non-discoloured surfaces reduce reworking tasks and working times. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Maximum economic efficiency
  • Reduced load
  • Universal use

PREMIUM*** cut-off wheels

For stainless steel

TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. Despite its versatile use, the tool offers maximum cutting ability and the longest lifetime. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting or a reduction in the fatigue strength. Show more Show less

  • Broad assortment
  • Stainless steel specialist
  • Environmentally-friendly

Accessories

For rough cleaning wheel

These accessories enable the 1GR rough cleaning wheel to be clamped onto straight grinders. Easy handling and the highest possible levels of safety are guaranteed for the operator. Please observe the maximum permissible speed of your tool.

PREMIUM*** PRE-POLISH

For steel and stainless steel

To prepare surfaces for polishing, you require a sturdy, high-quality tool. The PREMIUM*** PRE-POLISH comprises several layers of abrasive fabric to achieve a long lifetime and sturdiness. This allows the tool to be used for smaller deburring jobs as well. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less

  • The best results
  • Versatile
  • Longest lifetime

PREMIUM*** JUTE disc

For steel and nonferrous metals

The TYROLIT JUTE disc is a new, unique grinding wheel that combines abrasiveness with a high level of comfort while working. It achieves excellent results on both steel and nonferrous metals. The longest lifetime and an environmentally friendly jute fibre core deliver the best performance. An additional back up pad is not required, as there is already one integrated in the product. The natural fibre core can be trimmed, giving it the edge over other discs in terms of its lifetime. This saves the user time and great expense. Show more Show less

  • Longest lifetime
  • Extremely high stock removal rate
  • Environmentally-friendly

PREMIUM*** accessories

For SCM discs

The intelligent design of our SCM discs enables them to be used on all the back up pads available in our assortment. The removable centre hole of the SCM disc enables the disc to be fitted to the back up pad in a self-centring position. The discs and back up pads are designed for use on the angle grinder in all common diameters from 115 to 178 mm. Show more Show less

PREMIUM*** mounted flap wheels

For steel, stainless steel and nonferrous metals

These tools adapt optimally to every workpiece contour thanks to their flexibility. The radially arranged flaps of the mounted flap wheels can be used on various materials and permit precise work for different applications, such as matting, pre-polishing and the cleaning of surfaces. The highly flexible flaps also make light work of machining hard-to-reach areas. Show more Show less

  • High flexibility
  • Universal use
  • Less work required

PREMIUM*** paper rolls

For plastics, wood, paints and lacquers

With a semi-open grain distribution on a light paper backing, TYROLIT PREMIUM*** paper rolls are ideally suited to hand sanding or for use on orbital sanders. The semi-open coating of the PREMIUM*** paper roll prevents loading of the product and delivers an excellent surface finish. Show more Show less

  • Broad assortment
  • Versatile application
  • Special use

PREMIUM*** paper sheets

For steel, nonferrous metals, wood, paints and lacquers

The paper sheets made of silicon carbide are the perfect product for preparing and machining metal, wood, paint and lacquer. The special feature of the PREMIUM*** sheets is a latex-finished backing, which makes them ideal for wet and dry finishing. The closed coating of the PREMIUM*** paper sheets delivers an excellent surface finish. Show more Show less

  • Broad assortment
  • PREMIUM quality
  • Flexible

PREMIUM*** TFC

For plastic, composites, gel coat and wood

TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. This durable and flexible product has been developed with a special film backing to achieve improved edge stability and stock removal rate. The product delivers an exceptionally even finish on lacquers, paints and composites. Clogging and loading of the disc is reduced, thus increasing the product's lifetime. Show more Show less

  • Increased lifetime
  • Simple handling
  • Great overall abrasion

PREMIUM*** QUICK CHANGE DISC

For steel and stainless steel

With TYROLIT QUICK CHANGE DISCS you can save a considerable amount of time. This specification delivers maximum stock removal rates at the same time as a long lifetime. This is achieved by combining the zirconium and ceramic aluminium oxide with a three-layer product structure. In addition, this product also delivers a high level of stability, low grain break-out and enhanced edge stability. Show more Show less

  • Maximum stock removal rates
  • Longest lifetime
  • Broad assortment

PREMIUM*** SPIRAL rollers

For steel, stainless steel and nonferrous metals

The patented shape of the newly developed PREMIUM*** spiral rollers means they are extremely easy and convenient to use without lateral deflection. Using the PREMIUM*** spiral rollers significantly increases productivity by avoiding typical roller imprinting on the workpiece. This means grinding processes do not have to be performed again. In addition, vibrations are considerably reduced and the load is minimised. The convenient and intuitive operation does not require extensive training to learn, meaning convincing results are achieved immediately. Show more Show less

  • Reduced working times
  • Reduced load
  • Consistent results

PREMIUM*** SCM belts

Universal use

With belts from the TYROLIT SCM range, TYROLIT is taking another step towards economic efficiency. The machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. In addition, the TYROLIT SCM range boasts the best results in terms of lifetime. Show more Show less

  • Reduces working times
  • Noticeable cost reduction
  • Comprehensive assortment

PREMIUM*** accessories

For spiral belts

This expandable rubber support has been specially designed for use with spiral belts. Expanding the flaps on the support enables the spiral belt to be fixed, ensuring it is safe and easy to mount. These accessories are suitable for all spiral belts in our assortment. Show more Show less

PREMIUM*** accessories

For rollers

These reduction bushes can be used for bench grinder roller applications. With this set, you have the option of reducing the original bore diameter to 32, 25, 22, 20, 16 or 12 millimetres.

MIRA REX

Ceramic honing rings for tooth flank honing

Over 25 years of experience in gear honing make TYROLIT the market and technology leader in its field. Now, more than ever, the MIRA REX product line has made it possible to provide the optimum technical solution for high-efficiency honing. The continuous further development of specifications regarding hardness and cutting ability guarantees maximum honing performance and long dressing cycles.

  • Maximum performance
  • Short initial dressing times
  • Extremely rapid availability
  • System solution

PREMIUM*** flap disc

CERABOND flap disc for stainless steel

We at TYROLIT always endeavour to bring our customers innovative products and a comprehensive assortment. For this reason, TYROLIT has now extended the CERABOND family to include the new CERAMIC flap discs. A unique bond system combined with a high-performance PREMIUM cloth offers the operator greater abrasiveness. This flap disc is particularly suitable for stainless steels and demanding grinding applications. In addition, the unique bond system prevents premature grain break-out and leads to a long product lifetime. The additional TOP SIZE coating ensures cooler grinding, allowing a longer lifetime and reducing discolouration on the workpiece surface. Also available Show more Show less

  • Enhanced abrasiveness
  • Longer lifetime
  • Enhanced economic efficiency
  • Trimmable shape 28N

PREMIUM*** rough grinding wheel

2in1 for steel and stainless steel

This rough grinding wheel is particularly suitable for steel and stainless steel applications. Due to its softer design, the PREMIUM*** 2in1 is quick and convenient to use and requires minimal effort. This is made possible by a new bond with coarser grain and a new layer composition. What makes our 2in1 rough grinding wheel so unique is the bevelled and defined edge of the tool. With the "Comfort Start" edge, the user can achieve a pleasant start to grinding and the level of comfort while working is increased many times over. Show more Show less

  • Enhanced economic efficiency
  • Less work required
  • Enhanced comfort while working

PREMIUM*** resin cup wheel

For stone

Cup wheels achieve maximum stock removal rates and lifetime for grinding jobs on large areas. The stone cup wheel is particularly suitable for pre-grinding imperfections on concrete surfaces, bevelling and pre-grinding artificial stone and patio slabs, surface grinding on marble, slate and granite. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

  • High productivity
  • Universal use
  • Broad assortment

PREMIUM*** ceramic points

For steel

In foundries and mould making, using ceramic mounted points is often the only method of achieving improved surface results on hard-to-reach parts. TYROLIT PREMIUM*** mounted points offer the highest possible lifetime even for hardened steels. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Maximum operating speed: 50 m/s Show more Show less

  • Broad assortment
  • High quality
  • Versatile application area

PREMIUM*** cup brushes

For steel

Wire brushes are universal tools for all applications. Cup brushes in particular are among the most commonly-used brush tools. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

  • Broad assortment
  • Versatile tool
  • Highest quality

PREMIUM*** wire brushes

For nonferrous metals

Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. They are also particularly suitable for cleaning the inside of pipes. Knotted wire brushes are suitable for roughening, deburring, descaling, matting and cleaning. Also to remove burr, rust, rubber and other impurities in difficult-to-reach areas. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

PREMIUM*** round brushes

For universal use

The versatile round brushes for floorstanding grinders are used in a variety of industries. Wire brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Round brushes with aluminium oxide are somewhat softer and therefore less abrasive. They are primarily used in wood structuring, but also for light deburring if very small rounded edges are desired. TYROLIT wire brushes are manufactured to the highest standards to make work for the operator easier and safer. Show more Show less

  • Powerful tool
  • Versatile tool
  • Highest quality

PREMIUM*** universal hand brushes

For nonferrous metals

TYROLIT hand brushes are suitable for practically any application. This tool enables the deburring and cleaning of welding seams and surfaces. The assortment consists of wire brushes with a varying number of wire sequences that can be used depending on the application. These products are equipped with a high-quality beech wood handle. Show more Show less

  • Versatile tool
  • Broad assortment
  • Highest quality

PREMIUM*** Wet drilling bits

CDM*** | in TGD®-technology (from Ø 82 mm)

Drill motors over 3 kW | medium-hard to hard concrete aggregates. Quality tools for the most demanding applications and maximum economic efficiency. Excellent and consistent performance, universal use and smooth core removal. Segmented drill from Ø 82 mm with TGD®-technology and new segment height of 11.3 mm. Laser welded segments up to a Ø 250 mm for maximum safety.

  • Consistently very fast cutting performance and noticeable smooth running
  • Long lifetime.

PREMIUM*** grinding wheels

1F80 for nonferrous metals

The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. This product has been specially developed for nonferrous metals and is ideal for adding flutes and notches, as well as deburring gears. In addition, the wheel makes light work of maintaining turbine blades, and rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less

  • Universal use
  • Enhanced economic efficiency
  • Highest quality

PREMIUM*** tungsten carbide burr set

For cast iron, steel and stainless steel

The PREMIUM*** tungsten carbide burr set contains common burrs for machining cast iron, steel and stainless steel materials. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less

  • Universal use
  • Various applications
  • Broad assortment

PREMIUM*** cut-off wheels

Super-thin cut-off wheels for stainless steel

With the next generation PREMIUM*** cut-off wheels for stainless steel you can enhance performance while significantly reducing tool wear. Super-thin cut-off wheels can be obtained from TYROLIT in thicknesses from 0.75 to 1.6 mm. They are particularly suitable for thin-walled metal sheets, profiles and pipes, as well as reinforced steel. Even for small stainless steel cross-sections and rods, and corrosion-resistant or acid-resistant stainless steel these cut-off wheels offer effortless machining. The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. Show more Show less

  • Enhanced economic efficiency
  • Maximum comfort while working
  • Reduced working times

Accessories

For cut-off wheels with a small diameter

These accessories enable cut-off wheels with small diameters to be clamped onto straight grinders. Easy handling and the highest possible levels of safety are guaranteed for the operator. Please observe the maximum permissible speed.

PREMIUM*** cut-off wheels

For stone

This PREMIUM*** cut-off wheel achieves the best results due to its excellent cutting ability that reduces the work of the operator. The cut-off wheel delivers the optimum cutting performance on solid material and large cross-sections. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Maximum economic efficiency
  • Reduced load
  • Sturdy tool

PREMIUM*** cut-off wheels

For nonferrous metals

In order to cut nonferrous metals, the tool must have a high cutting ability. To this end, TYROLIT has developed a special formula and production method in order to be able to perform stationary cutting on NF metals too. New specifications prevent the clogging and dulling of the grinding wheel which used to be a common result of material abrasion. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Show more Show less

  • Reduced working times
  • Reduced working times
  • Enhanced performance

PREMIUM*** POLISH

Universal use

Compared to conventional felt wheels, this product uses highly flexible flaps for optimum heat distribution and cool grinding. In doing so, the PREMIUM*** POLISH avoids undesired discolouration. Used in combination with the TYROLIT grinding paste, a perfect mirror finish is achieved on your workpiece. The tool has been specially developed to achieve the best results even on non-adjustable angle grinders. Show more Show less

  • Perfect mirror finish
  • Reduced working times
  • Universal use

PREMIUM*** JUTE disc

For steel and stainless steel

The TYROLIT JUTE disc is a new, unique grinding wheel that combines abrasiveness with a high level of comfort while working thanks to a ceramic grain. The longest lifetime and an environmentally friendly jute fibre core deliver the best performance. An additional back up pad is not required, as there is already one integrated in the product. The natural fibre core can be trimmed, giving it the edge over other discs in terms of its lifetime. This saves the user time and great expense. Show more Show less

  • Longest lifetime
  • Extremely high stock removal rate
  • Environmentally-friendly

BASIC* mounted flap wheels

For steel, stainless steel and nonferrous metals

The BASIC* mounted flap wheels adapt well to every workpiece contour thanks to their flexibility. The radially arranged flaps of the mounted flap wheels can be used on various materials and permit precise work for different applications, such as matting, pre-polishing and the cleaning of surfaces. The highly flexible flaps also make light work of machining hard-to-reach areas. Show more Show less

  • Precise work
  • Universal use
  • Less work required

Basic* belts

Universal use

The BASIC* belts for the portable belt grinder can be used universally, but are most commonly used on wood. They are suited to this use as they comprise aluminium oxide and polycotton backing. A special grain coating prevents loading of the belts when grinding soft materials, such as wood and paints. This delivers a good grinding power and long lifetime. Simple handling and mounting save extra working time. Show more Show less

  • Versatile use
  • Reduced working times
  • Broad assortment

BASIC* cloth rolls A-B01 C JJ

Universal use

With highly flexible cloth rolls from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth rolls for hand-guided grinding. For finishing coatings, smoothing and cleaning composites, and for clean intermediate grinding, we recommend cloth rolls on an orbital sander. Show more Show less

  • Versatile
  • Versatile application
  • Broad assortment

BASIC* paper sheets

For plastics, wood, paints and lacquers

With a semi-open grain distribution on a light paper backing, TYROLIT BASIC* paper sheets are ideally suited to hand sanding or for use on orbital sanders. The semi-open coating of the BASIC* paper sheets prevents loading of the product and delivers an excellent surface finish. Show more Show less

  • Good assortment
  • Flexible
  • Special use

PREMIUM*** TFC

For plastic, composites, gel coat and wood

TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. The thin paper backing makes the disc ideal for finishing various wood surfaces and for preparing paint, lacquer or wax surfaces. The product delivers an exceptionally even finish on lacquers, paints and composites. Clogging and loading of the disc is reduced, thus increasing the product's lifetime. Show more Show less

  • Increased lifetime
  • Simple handling
  • Reduced working times

STANDARD** Quick Change MINIDISC

2in1 for steel and stainless steel

The STANDARD** Minidisc was specially developed for machining and refining difficult to access places. Every disc is fitted with a quick fixing system which enables fast and convenient tool changes. The MINIDISC is also a 2in1 rough grinding wheel and is therefore equally suitable for steel and stainless steel. Show more Show less

  • Enhanced economic efficiency
  • Universal use
  • Individual application

PREMIUM*** rough cleaning rollers

For steel, stainless steel and PVC

With the TYROLIT rough cleaning roller for burnishing machines, you can effortlessly remove rust, paint, lacquer and underbody sealant from your workpiece. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. Particularly suitable for cleaning large, even surfaces. At the same time, they prevent clogging or loading. Show more Show less

  • Versatile tool
  • Powerful
  • User-friendly

MIRA DDG

Diamond dressing gears for dressing honing rings

TYROLIT's MIRA DDG has made the company into a market and technology leader in the field of diamond dressing gear production. Honing rings are trued and sharpened during the dressing process. Thanks to their high level of reproducibility and cutting ability, MIRA DDG dressing gears guarantee optimum dressing results, the best possible gearing and surface quality as well as long tool lifetime.

  • Cutting ability
  • Accuracy
  • Replating option
  • Gear cutting expertise
  • System solution

PREMIUM*** flap disc

LONGLIFE for steel and stainless steel

The PREMIUM*** LONGLIFE flap disc offers the longest lifetime and an excellent stock removal rate. This flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. Problem-free welding as well as edge and surface grinding, particularly when used on powerful angle grinders. Show more Show less

  • Excellent overall abrasion
  • Robust construction
  • Longest lifetime

PREMIUM*** rough grinding wheel

Silentio 2in1 for steel and stainless steel

The PREMIUM*** Silentio sets new milestones in terms of noise reduction. With a reduction of 10 decibels, noise perception is minimised by 50%. This increases the user's level of comfort while working, avoiding lasting physical harm. This rough grinding wheel has been developed for stainless steel applications and is suitable for use with both steel and stainless steel. Show more Show less

  • Enhanced work safety
  • Enhanced economic efficiency
  • Universal use

STANDARD** resin cup wheel

For steel

Cup wheels achieve excellent stock removal rates and lifetime for grinding jobs on large areas. The STANDARD** cup wheel for steel is ideal for edge grinding, bevelling and grinding welding seams. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

  • High productivity
  • Universal use
  • Optimum results

PREMIUM*** ceramic points

For HSS

Tool steels display exceptional hardness and strength depending on their intended purpose. The PREMIUM*** mounted points for HSS offer the best prerequisites for machining workpieces up to the lowest tolerance ranges. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Maximum operating speed: 35 m/s Show more Show less

  • Broad application area
  • High quality
  • Versatile application options

PREMIUM*** cup brushes

For stainless steel

Wire brushes are universal tools for all applications. Cup brushes in particular are among the most commonly-used brush tools. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

  • Broad assortment
  • Versatile tool
  • Highest quality

PREMIUM*** wire brushes

For universal use

Wire brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. They are also particularly suitable for cleaning the inside of pipes. Wire brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

STANDARD** Wet drilling bits

CDL**

Drill motors up to 3 kW | soft to medium-hard concrete aggregates. Details: quality tools for everyday use. An impressive drilling speed-lifetime ratio. Universal use, lasting quality. Laser welded segments up to a diameter of 250 mm for maximum safety.

  • Quality tool

PREMIUM*** grinding wheels

1F80 for cast iron

The PREMIUM*** 1F80 high-performance rough grinding wheel is particularly suitable for universal grinding tasks on hard-to-reach areas. This product has been specially developed for cast iron and is ideal for adding flutes and notches. In addition, the wheel makes light work of rough grinding curved surfaces in cavities and ridges. For diameters above 80 mm, we recommend using a protection cover. Show more Show less

  • Universal use
  • Enhanced economic efficiency
  • Highest quality

PREMIUM*** tungsten carbide burr set

For nonferrous metals

The PREMIUM*** tungsten carbide burr set contains common burrs for nonferrous metal applications. Production on CNC machines results in a highly efficient precision tool that achieves optimum grinding results. With this tungsten carbide burr you can achieve the longest lifetimes when used on practically any material. By choosing the right machine, the correct revolutions per minute and operating speed, and the appropriate cutting and tooth profile, you will pave the way for PREMIUM results. Show more Show less

  • High stock removal rate
  • Special use
  • Broad assortment

PREMIUM*** cut-off wheels

Super-thin cut-off wheels for nonferrous metals

The next generation of TYROLIT PREMIUM*** cut-off wheels achieves a better performance than other PREMIUM wheels, and with considerably reduced tool wear. In order to cut nonferrous metals, the tool must have a high cutting ability. To this end, TYROLIT has developed a special formula and production method in order to achieve short cutting times with NF metals too. New specifications prevent the clogging and dulling of the grinding wheel which used to be a common result of material abrasion. Show more Show less

  • Enhanced economic efficiency
  • Maximum comfort while working
  • Reduced working times

STANDARD** cut-off wheels

For steel

TYROLIT provides the optimal tools for use on large cut-off machines in trade and industry. These include the STANDARD** cut-off wheel for steel in large diameters. This special tool is ideal for cutting workpieces with large cross-sections. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Lower cutting costs
  • Reduced load
  • Reduced working times

PREMIUM*** cut-off wheels

For stone

With this tool you obtain the ideal solution for stationary cutting of common building materials. This PREMIUM*** cut-off wheel achieves the best results for large cross-sections due to its excellent cutting ability that reduces the work of the operator. As with all TYROLIT PREMIUM*** cut-off wheels, this tool has been optimised to achieve the best possible cutting ability and lifetime. Show more Show less

  • Reduced working times
  • Universal use
  • Enhanced work safety

PREMIUM*** POLISHING PASTES

For steel, stainless steel and nonferrous metals

With the TYROLIT PREMIUM*** polishing paste in different specifications you will achieve the final mirror finish. They can be used to perform precision machining work depending on the desired surface finish. Polishing pastes are available in three specifications. Using the POLISH (white), you will achieve a perfectly smooth finish. A achieve a high-gloss finish we recommend S-POLISH (blue) while the POLISH-NE paste is perfect for nonferrous metals. Show more Show less

  • Perfect mirror finish
  • Universal use
  • Appropriate application options

Accessories

For JUTE DISC

With a large distance between the disc and machine, you can machine even surfaces at a low grinding angle. Use our PREMIUM*** JUTE disc accessories to achieve this. The accessories are compatible with all disc diameters.

PREMIUM*** belts

For steel and stainless steel

Due to the hard zirconium used in these PREMIUM*** belts they are ideal for very high pressure and deliver above-average stock removal rates. Active coolants reduce the generation of heat while grinding. This high-performance product equipped with durable polyester backing has been developed for demanding steel and stainless steel applications. These products are mainly used for dry applications. Show more Show less

  • The best results
  • Cool polished section
  • Sturdy tool

BASIC* cloth rolls A-B01 C JX

Universal use

With flexible cloth rolls from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth rolls for hand-guided grinding. For finishing coatings, smoothing and cleaning composites, and for clean intermediate grinding, we recommend cloth rolls on an orbital sander. Show more Show less

  • Versatile
  • Versatile application
  • Broad assortment

BASIC* cloth sheets

Universal use

With the flexible cloth sheets from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends BASIC* cloth sheets. However, our products can also be used for finishing coatings, or smoothing and cleaning composites. Show more Show less

  • Versatile
  • Flexible
  • Broad assortment

PREMIUM*** TFC

For hard stone, steel, composites, plastics and soft stone.

TYROLIT FAST CHANGE enables you to change a disc very quickly thanks to the Velcro fastening. The thin paper backing makes the disc ideal for finishing tasks. The product delivers an exceptionally even finish on metals, lacquers, composites, marble and stone. The product delivers an exceptionally even finish on hard stone, steel and composites. Clogging and loading of the disc is reduced, thus increasing the product's lifetime. Show more Show less

  • Increased lifetime
  • Simple handling
  • Reduced working times

STANDARD** SOFTJOB

2in1 for steel and stainless steel

For us, the STANDARD** SOFTJOB Q-Disc represents maximum flexibility for machining difficult to access areas. It has a broad application area, comprising: Surface preparation and improvement, preparation of welding work and cleaning of weld seams, processing of contours and profiled surfaces, processing of handrails and pipes, cleaning of surfaces, removal of rust and paint residues. Show more Show less

  • Universal use
  • Consistent performance
  • Saves working time

PREMIUM*** POLISTAR SET

For stone

These Velcro fastenable ceramic polishing pads are ideal for polishing stone surfaces. With the POLISTAR set, you receive 7 pads in grit sizes of 50, 150, 300, 500, 1000, 2000 and 3000, as well as a supporting disc with an M14 mounting. With the PREMIUM*** POLISTAR pads, you can achieve the best results on granite, marble and terrazzo. Show more Show less

  • High quality
  • Easy handling
  • Wide range of applications

MIRA BG

Cup wheels for grinding bevel gears

With the MIRA BG product line, TYROLIT offers an optimum solution for grinding bevel gears. More stringent quality requirements make hard finishing by grinding increasingly necessary.

  • High productivity
  • Low heat build up
  • Maximum profile retention
  • Available with or without mounting plate

PREMIUM*** flap disc

FASTCUT for steel and stainless steel

The PREMIUM*** FASTCUT is synonymous with excellent, specific abrasion of material. As a result, you will achieve your goal faster, and the disc will remain easy cutting and abrasive over its entire lifetime. The TYROLIT FASTCUT flap disc is the perfect tool for demanding grinding jobs, such as edge grinding and welding. It is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. The additional TOP SIZE coating provides cool grinding. It is also possible to use it on aluminium, to a limited extent. Show more Show less

  • Excellent stock removal rate
  • Cool polished section
  • High abrasiveness

PREMIUM*** rough grinding wheel

CONFLEX for steel and stainless steel

With the PREMIUM*** CONFLEX the optimum grinding angle is already preset due to the wheel shape. This makes horizontal machine guiding possible, facilitating the user's work. Using the optimal angle makes it possible to achieve consistent wear of the tool and an even surface. This rough grinding wheel is particularly suitable for steel and stainless steel applications. Show more Show less

  • Enhanced economic efficiency
  • Simple handling
  • Enhanced comfort while working

STANDARD** resin cup wheel

For stone

Cup wheels achieve excellent stock removal rates and lifetime for grinding jobs on large areas. The stone cup wheel is particularly suitable for pre-grinding imperfections on concrete surfaces, bevelling and pre-grinding artificial stone and patio slabs, surface grinding on marble, slate and granite. There is a choice of bore design 22.23 and thread design M14 for fitting to the tool. Observe operating speed: max. 50 m/s Show more Show less

  • High productivity
  • Universal use
  • Various models

PREMIUM*** set

Ceramic points for steel

The PREMIUM*** ceramic mounted point set contains all the common mounted points for working on steel, including a roughing stone. The points provide the longest possible lifetime for deburring, bevelling and edging work. These tools also strike a perfect balance in terms of chip performance and the intended surface finish. Show more Show less

  • Broad assortment
  • High quality
  • Versatile application area

PREMIUM*** cup brushes for nonferrous metals

For nonferrous metals

PREMIUM*** cup brushes with brass wire are ideal for machining nonferrous metals. Due to its hardness, the brass wire achieves the best results on the brass workpiece. Their knotted wire design enables them to easily remove paint, dirt and varnish. They are ideal for fine work and thus make working on nonferrous metals easier. Show more Show less

  • Special tool
  • Highest quality
  • Powerful tool

PREMIUM*** shaft mounted cup brushes

For steel

Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

STANDARD** Wet drilling bits

CDM**

Drill motors over 3 kW | medium-hard to hard concrete aggregates. Details: quality tools for everyday use. an impressive drilling speed-lifetime ratio. Universal use, lasting quality. Laser welded segments up to a diameter of 250 mm for maximum safety.

  • Quality tool

Accessories

For 1F80 rough grinding wheels

These accessories are suitable for clamping all rough grinding wheels available in the TYROLIT assortment for straight grinders. Please observe the maximum permissible speed.

PREMIUM*** cut-off wheels

ACCU 2in1 for steel and stainless steel

The super-thin PREMIUM*** cut-off wheel has been specially designed for battery-powered angle grinders and enables smaller repairs to be carried out without requiring a power source. This therefore makes it considerably easier to use on scaffolding, in difficult-to-reach terrain or workplaces. These products have been optimised for battery-powered angle grinders and are ideal for cutting thin-walled metal sheets, profiles and pipes. They also make light work of machining small cross-sections, rods and reinforced steel. Show more Show less

  • Cordless work
  • Universal application options
  • Reduced downtimes

STANDARD** cut-off wheels

For rails

Despite extreme application conditions, such as humidity, cold and temperature fluctuations, the stone cut-off wheel from TYROLIT offers reduced cutting times coupled with minimal effort. Clean, non-discoloured surfaces reduce reworking tasks and working times. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Excellent economic efficiency
  • Reduced load
  • Universal use

STANDARD** cut-off wheels

For steel

TYROLIT provides the optimal tools for use on stationary cutting machines in chop cut. This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. The internal reinforcement and rough side surfaces enable low burr cutting of workpieces. As with all TYROLIT STANDARD** cut-off wheels, this tool has been optimised to achieve excellent cutting ability and lifetime. Show more Show less

  • Special tool
  • Universal use
  • Reduced working times

PREMIUM*** POLISHING PROGRAM

Three steps to a mirror finish

With the TYROLIT POLISHING PROGRAM you can achieve the perfect high gloss surface in just a few steps. Preventing clogging of the wheels provides an above-average lifetime. Exceptionally cool grinding due to special flaps ensures outstanding surface finishes. Exceptionally high levels of work safety due to low heat build-up, minimal formation of dust and quiet operation. Show more Show less

PREMIUM*** vulcanised fibre discs

For steel

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and is made of a zirconium aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less

  • Maximum abrasiveness
  • Longest lifetime
  • Strong backing

Premium*** accessories

For TFC

Our back up pads can be used on most dual action sanders and their medium density provides the ideal support for finishing and preparing surfaces. The specially developed product design delivers outstanding dust extraction. You can use practically any disc with our back up pads. They fit discs with 0, 6, 7, 9 and 15 holes. Show more Show less

PREMIUM*** QUICK CHANGE DISC

For steel, nonferrous metals, plastic and wood

With TYROLIT QUICK CHANGE DISCS you can save time and increase productivity. They provide easy handling and can be used without the need for any additional mounting tools. Our QUICK CHANGE DISC assortment includes discs for general grinding tasks on any material. Our two different types cover the main mounting systems. Show more Show less

  • Universal use
  • Less work required
  • Broad assortment

BASIC* cloth sheets

Universal use

With highly flexible cloth sheets from TYROLIT you can machine almost any material. When finishing surfaces, preparation either by hand or using an orbital sander is required. When machining wood, paint and lacquer, TYROLIT recommends the BASIC* cloth sheets. However, our products can also be used for finishing coatings, or smoothing and cleaning composites. Show more Show less

  • Versatile
  • Highly flexible
  • Broad assortment

PREMIUM*** belts

For steel and stainless steel

Belts with self-sharpening ceramic grain offer a high stock removal rate on steel and stainless steel. Thanks to this self-sharpening effect, an even surface quality is achieved over the entire lifetime of the abrasive belts. Moreover, the composition of the abrasive belt reduces effort for the operator as less pressure is required. Show more Show less

  • Reduced load
  • Consistent surface result
  • Maximum abrasiveness

MIRA ICE

Vitrified bonded profile grinding wheels for gear grinding

The MIRA ICE product line was developed in collaboration with experienced TYROLIT experts, especially for the grinding of large gears. A new kind of development approach enables previously unknown results to be achieved in terms of economic efficiency and cool grinding. MIRA ICE has been further optimised on the basis of the leading product line from BURKA-KOSMOS and sets new standards throughout the industry.

  • Cool polished section
  • The best economic efficiency
  • Maximum process stability

PREMIUM*** flap disc

OVERLAP for steel and stainless steel

The PREMIUM*** OVERLAP is the right tool to effortlessly access hard-to-reach areas. Its flaps overlap by about 10 mm and make light work of the finishing of fillet welds, grooves and flutes. The OVERLAP flaps also impress in terms of stock removal rate and lifetime when used on steel and stainless steel. Show more Show less

  • Enhanced flexibility
  • Universal use
  • Ease of use

PREMIUM*** rough grinding wheel

3in1 for steel, stainless steel and cast iron

With the PREMIUM*** 3in1 rough grinding wheel with zirconium aluminium oxide you can impress on three levels. High performance on steel, stainless steel and cast materials, as well as chemical purity distinguish the product. This tool does not contain iron, sulphur, chlorine and fluorine, and leaves workpiece surfaces in a neutral condition. The abrasiveness and long lifetime enable high stock removal rates within the shortest possible time. Thanks to its chemical purity; free of iron, sulphur, chlorine and fluorine, the wheel is particularly suited to special application areas such as nuclear power stations. Show more Show less

  • Universal use
  • Faster working
  • Chemical purity

PREMIUM*** mounted points

ELASTIC for nonferrous metals, PVC, steel and stainless steel

Coordinated light grey bond systems enable the ELASTIC mounted points to be put to both universal use and use tailored to the application. The assortment includes soft elastic points for curved surfaces and medium elastic points for straight surfaces. Our range also includes fewer elastic points for working at higher speeds and mottling points for mottling surfaces. Maximum operating speed: BE13: 16 m/s; BE15: 20 m/s; BE16: 32 m/s. Show more Show less

  • Versatile
  • Special application
  • Coding

PREMIUM*** tapered brushes

For steel

These PREMIUM*** wire brushes are particularly suitable for machining hard-to-reach parts due to their shape. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

  • Special application area
  • Highest quality
  • Powerful tool

PREMIUM*** shaft mounted cup brushes

For stainless steel

Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

STANDARD** Wet drilling bits

CDM** thin-walled

medium-hard to hard concrete aggregates. Quality tools for everyday use. an impressive drilling speed-lifetime ratio. Universal use, lasting quality. 2.0 mm segment width up to a diameter of 121 mm and 2.5 mm segment width from a diameter of 131 mm upwards

  • Quality tool

PREMIUM*** cut-off wheels

2in1 with DEEP Cut Protection for steel and stainless steel

Using newly developed technology and new materials we have succeeded in taking another step towards improved user safety. The PREMIUM*** cut-off wheel with DEEP Cut Protection enables the user to achieve maximum insertion depths into the workpiece without damaging the wheel. There is no risk of sharp workpiece edges removing the crown. Show more Show less

  • Enhanced safety
  • Greater economic efficiency
  • Versatile application options

STANDARD** cut-off wheels

For stone

The technology from TYROLIT makes it possible to use two external reinforcements for cutting solid material and large cross-sections. This STANDARD** cut-off wheel achieves the best results due to its excellent cutting ability that reduces the work of the operator. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Excellent economic efficiency
  • Reduced load
  • Sturdy tool

BASIC* cut-off wheels

For steel

This special tool is ideal for cutting workpieces with large cross-sections, as well as solid material and profiles. The internal reinforcement and rough side surfaces enable low burr cutting of workpieces. As with all TYROLIT BASIC* cut-off wheels, this tool has been optimised to achieve excellent cutting ability and lifetime. Show more Show less

  • Special tool
  • Universal use
  • Reduced working times

PREMIUM*** POLISTAR

For stone

These Velcro fastenable ceramic polishing pads are ideal for polishing stone surfaces. The grit sizes available in the assortment, from 50 to 3000, ensure a perfect surface finish on the material. With the PREMIUM*** POLISTAR pads, you can achieve the best results on granite, marble and terrazzo. Show more Show less

  • High quality
  • Easy handling
  • Wide range of applications

PREMIUM*** vulcanised fibre discs

For steel and stainless steel

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and stainless steel, and is made of a zirconium aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less

  • Longest lifetime
  • Maximum economic efficiency
  • Maximum stock removal

PREMIUM*** SCM QUICK CHANGE DISC

For steel, stainless steel, nonferrous metals, plastic and wood

With the new TYROLIT SCM program, we are now taking a further step towards economic efficiency. Simple handling and mounting save you time. With SCM, the machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. Show more Show less

  • Reduces working times
  • Noticeable cost reduction
  • Comprehensive assortment

PREMIUM*** fleece sheets

Universal use

Our fleece sheets are used for cleaning and processing surfaces using orbital sanders or for hand-guided grinding. A wide range of specifications offer the user a variety of surface finish options. The assortment extends from coarse specifications for cleaning weld seams through to ultra-fine and polishing fleece. Show more Show less

  • Long lifetime
  • Flexible use
  • Universal use

PREMIUM*** fleece rolls

Universal use

TYROLIT fleece rolls are used for cleaning and processing surfaces using orbital sanders or for hand-guided grinding. A wide range of specifications offer the user a variety of surface finish options. The assortment extends from coarse specifications for cleaning weld seams through to ultra-fine and polishing fleece. Show more Show less

  • Long lifetime
  • Flexible use
  • Universal use

GENIS 2

VITRIFIED-BONDED CBN GRINDING TOOLS FOR EXTERNAL CYLINDRICAL GRINDING

With the GENIS 2 product line, TYROLIT defines a new performance level and a wider range of applications for external cylindrical grinding with vitrified-bonded CBN tools. GENIS 2 is characterised by a high-strength bond with excellent moistening properties, which securely binds the CBN grain. Low bond volumes enable very porous, cool-grinding and extremely easy-cutting specifications with a long lifetime. Show more Show less

  • Optimum grain utilisation
  • High economic efficiency
  • High running precision
  • Wide range of applications

GENIS

External cylindrical grinding with vitrified bonded CBN high-performance grinding tools

Following intensive research, TYROLIT has succeeded in developing GENIS - a bond system that ensures optimum wetting and coating of the CBN grain, even with extremely low bond content. By selecting the composition of the bond, at the right firing conditions crystallisation is controlled in a targeted manner. This enables the production of porous textures with high mechanical strength, which feature maximum resistance to the effect of cooling lubricants. The cool grinding specifications of our GENIS highest performance tools enable you to purposely reduce grinding forces and so make the most efficient use of the CBN grain. In all applications, practical experience shows that reduced grinding forces enable minimal wear and maximum profile retention. Show more Show less

  • High adhesion strength of the CBN and optimum resistance to cooling lubricants
  • New high-performance CBN grain qualities
  • Optimised chipping space (porosity) and cool grinding
  • Reduced grinding forces
  • Neutral zone

PREMIUM*** flap disc

2in1 for steel and stainless steel

The PREMIUM*** 2in1 flap disc combines an excellent lifetime with very high specific abrasion. The TYROLIT 2in1 flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. Problem-free welding as well as edge and surface grinding, particularly when used on powerful angle grinders. Show more Show less

  • Large selection
  • Universal use
  • Ease of use

PREMIUM*** rough grinding wheel

For stainless steel

The high-performance rough grinding wheel has been specially designed for stainless steel applications. The PREMIUM*** INOX rough grinding wheel combines a long lifetime and the best cutting ability. To achieve this a special mixture of regular aluminium oxide and zirconium aluminium oxide is used. This rough grinding wheel is specially designed for stainless steel applications. Show more Show less

  • Enhanced economic efficiency
  • Stainless steel specialist
  • Universal use

PREMIUM*** tapered brushes

For stainless steel

These PREMIUM*** wire brushes are particularly suitable for machining hard-to-reach parts due to their shape. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

  • Special application area
  • Highest quality
  • Powerful tool

PREMIUM*** shaft mounted cup brushes

For nonferrous metals

Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted cup brushes are suitable for cleaning work, such as removing paint, rust, scale, crust, or deburring. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

Wet drilling bit accessories

Adapter

PREMIUM*** cut-off wheels

For nonferrous metals and stone

This PREMIUM*** cut-off wheel reduces the work of the operator due to its excellent cutting ability. When used on tiles, ceramics, clinker and nonferrous metals, the wheel impresses by achieving clean cutting edges and excellent cutting quality. Machine wear is significantly reduced by low wheel thicknesses. The advantages are topped off by its environmentally-friendly operation, thanks to the reduction in cutting waste. Show more Show less

  • Precise working
  • Universal use
  • Low load

BASIC* cut-off wheels

For steel

The BASIC* cut-off wheel for steel is suitable for cutting profiles, solid material and large cross-sections due to its design with two external reinforcements. With the BASIC* wheel, you can achieve reduced cutting times coupled with minimal effort. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Reduced working times
  • Universal use
  • Less rework

PREMIUM*** vulcanised fibre discs

For steel and stainless steel

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for use on steel and stainless steel, and is made of a ceramic aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less

  • Maximum abrasiveness
  • Longest lifetime
  • Strong backing

PREMIUM*** rough cleaning wheel

For steel, stainless steel and PVC

With the TYROLIT rough cleaning wheel for mini angle grinders you can effortlessly remove rust, paint, lacquer and underbody sealant. The porous nylon fibres, treated with aggressive abrasives, meet any challenge. At the same time, it prevents smearing and loading of the disc. This wheel offers the user quiet, non-strenuous grinding coupled with low generation of heat. Show more Show less

  • Versatile tool
  • Powerful
  • User-friendly

GENIS CF

Vitrified bonded CBN grinding tools with composite cores for external cylindrical grinding

With GENIS CF, TYROLIT is extending the performance spectrum of the GENIS product line with an innovative, fibre-reinforced composite core for numerous external cylindrical grinding applications. In addition to a weight reduction of up to 80%, this tool design features special damping characteristics, which result in improved grinding results and a longer lifetime.

  • Lower weight
  • Best damping
  • High economic efficiency
  • Replating option
  • Simultaneous machining

PREMIUM*** flap disc

COMBI for steel and stainless steel

The PREMIUM*** COMBI combines abrasive cloth and fabric in one tool. This enables two work steps to be performed in one. Material removal and simultaneous finishing of surfaces produce an optimal result. The long lifetime of the PREMIUM*** COMBI dramatically increases economic efficiency in comparison to conventional “surface conditioning” discs. The disc has also been specially developed to achieve good results at high speeds on non-adjustable angle grinders (max. 80 m/s). Show more Show less

  • High economic efficiency
  • Reduced load
  • Versatile use

PREMIUM*** rough grinding wheel

VIBSTAR for stainless steel

The vibration damping developed and patented by TYROLIT allows professional users to achieve exceptionally gentle grinding. The multi-layer structure and the permanently attached plastic flange reduce vibrations by up to 50%. The PREMIUM*** Vibstar technology helps to prevent occupational illnesses, such as muscular and skeletal damage, and neurological illnesses and circulatory problems, such as vibration white finger. This rough grinding wheel is specially designed for stainless steel applications. Show more Show less

  • Enhanced work safety
  • More even surfaces
  • Reduced costs

PREMIUM*** round brushes

For steel

The PREMIUM*** round brushes are ideal for welding. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

  • Broad assortment
  • Highest quality
  • Powerful tool

PREMIUM*** shaft mounted cup brushes

For universal use

Shaft mounted cup brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Shaft mounted cup brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

Wet drilling bit accessories

Sharpening plates

PREMIUM*** CERABOND cut-off wheel

2in1 for steel and stainless steel

The CERABOND bond system developed by TYROLIT combines an easy cutting ceramic grain with a unique bond structure. This prevents premature break-out of the grain and increases the abrasiveness many times over. The CERABOND cut-off wheel range is particularly suitable for optimum machining of extremely hard, sophisticated workpieces and solid materials. The range stands for a long lifetime and shorter working processes with maximum economic efficiency. Through the introduction of the 1.0 mm cut-off wheel with CERABOND system, the product family has been extended by a powerful member. The CERABOND product line has thus been completed and is now available in the specialist retail worldwide Show more Show less

  • Shorter working processes
  • Improved productivity
  • Lower production costs

BASIC* cut-off wheels

For stone

The technology from TYROLIT makes it possible to use two external reinforcements for cutting solid material and large cross-sections. The BASIC* cut-off wheel therefore offers good stability and cutting ability, reducing the work of the operator. Developed for use on manual cut-off machines with electric or petrol engines. Suitable for pure off-hand and guided off-hand applications. Show more Show less

  • Cost-effective use
  • Reduced load
  • Less rework

PREMIUM*** ELASTIC RONDELLER®

For steel and stainless steel

With the ELASTIC RONDELLER® TYROLIT provides an ideal tool for polishing and finishing. Thanks to the highly elastic grinding layer a surface improvement is achieved while protecting the material. Using a fibre glass core means it can be used on speed-controlled angle grinders. Ideally suited to work on vehicles, containers and aeroplanes. Show more Show less

  • High quality
  • Versatile
  • Careful grinding of uneven surfaces

PREMIUM*** vulcanised fibre discs

For steel and aluminium

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for general use and is made of an aluminium oxide mix. It can be used for outstanding results on steel and nonferrous metals. This fibre disc is available from our assortment in grit sizes 24 to 120. Show more Show less

  • Longest lifetime
  • Maximum economic efficiency
  • General use

PREMIUM*** accessories

For QUICK CHANGE DISCS

These accessories enable QUICK CHANGE DISCS to be easily and safely mounted on your mini angle grinder. The accessories are available in the common sizes of 50 and 75 mm diameter.

PREMIUM*** SCM belts

Universal use

With belts from the TYROLIT SCM range, TYROLIT is taking another step towards economic efficiency. The machining time of the workpiece can now be greatly reduced. A saving of one to three work steps is thus the key benefit. Thanks to the quick and high stock removal rate, applications such as the reduction of surface roughness, removal of discolouration, smoothing of surfaces and the cleaning and removal of weld seams can be realised. In addition, the TYROLIT SCM range boasts the best results in terms of lifetime. Show more Show less

  • Reduces working times
  • Noticeable cost reduction
  • Comprehensive assortment

PREMIUM*** flap disc

CERAMIC for Inox

Thanks to the self-sharpening ceramic abrasive grain, the PREMIUM*** CERAMIC flap disc is particularly suitable for stainless steels and demanding grinding applications. The additional TOP SIZE coating ensures cool grinding, allowing a longer tool lifetime and reducing discolouration on the workpiece surface. Thanks to the self-sharpening characteristic of the abrasive grain, a more even surface quality is achieved over the entire lifetime of the disc. Show more Show less

  • Reduced load
  • Consistent surface result
  • Maximum abrasiveness

PREMIUM*** rough grinding wheel

Silentio for stainless steel

The PREMIUM*** Silentio sets new milestones in terms of noise reduction. With a reduction of 10 decibels, noise perception is minimised by 50%. This increases the user's level of comfort while working, avoiding lasting physical harm. This rough grinding wheel with a unique wheel shape has been specially designed for stainless steel applications. Show more Show less

  • Enhanced work safety
  • Enhanced economic efficiency
  • Universal use

PREMIUM*** round brushes

For stainless steel

The PREMIUM*** round brushes are ideal for welding. TYROLIT will provide you with the appropriate wire brush for your application depending on the wire type. Twisted wire brushes are used for preparing surfaces and removing rust, scales and concrete residue. Wire brushes with knotted wire can also be used to remove rust and paint, as well as for fine grinding. Our products are also frequently used to clean welding seams. Show more Show less

  • Broad assortment
  • Highest quality
  • Powerful tool

PREMIUM*** shaft mounted round brushes

For steel

Shaft mounted round brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted wire brushes are suitable for removing rust, cleaning, smoothing, polishing, matting and roughening. Twisted shaft mounted round brushes are designed for welding and removing scale and paint. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

Wet drilling bit accessories

Brazing magnets

PREMIUM*** cut-off wheels

LONGLIFE for steel

In standard widths, this high-performance tool not only offers a cost-efficient solution, but also the highest safety standards. This is provided by the longest lifetime and stability of the PREMIUM*** LONGLIFE. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of LONGLIFE cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability. Show more Show less

  • Maximum economic efficiency
  • Versatile
  • Environmentally-friendly

PREMIUM*** ELASTIC RONDELLER®

For lacquers, paints and plastics

Thanks to the highly elastic grinding layer the TYROLIT ELASTIC RONDELLER® delivers a surface improvement while protecting the material. This tool is therefore ideal for polishing and finishing. The specially developed specification delivers the best results on lacquers, paints and plastics. Using a fibre glass core means it can be used on speed-controlled angle grinders. Ideally suited to work on vehicles, containers and aeroplanes. Show more Show less

  • High quality
  • Universal use
  • Careful grinding of uneven surfaces

BASIC* vulcanised fibre discs

For steel, aluminium and wood

Using fibre discs is a very simple and quick solution for removing material. A low level of vibration means the tools are convenient to use. This fibre disc has been designed for universal use and is made of an aluminium oxide mix. This fibre disc is available from our assortment in grit sizes 16 to 120. Show more Show less

  • Long lifetime
  • Maximum economic efficiency
  • General use

STARTEC XP-P+

Metal-bonded grinding tools for flute grinding

With the STARTEC XP-P+ product line, TYROLIT defines a new performance level for the flute grinding of tungsten carbide cutting tools. Two different diamond qualities and the innovative bond structure lead either to significantly reduced grinding forces or to a major increase in profile retention. The precision of the machined tools remains at the usual high level.

  • Increased feed speed
  • Easy profiling
  • Extended dressing intervals

Wet drilling bit accessories

Extensions

STARTEC XP-P

Maximum profile retention during tool grinding.

With the STARTEC HP product line, Tyrolit was already able to satisfy performance and quality requirements in the past. The STARTEC XP-P line now offers improved profile retention and low power consumption during the manufacture of tools made of HSS and HM. State-of-the-art raw material combinations and tried and tested production sequences make sure our customers enjoy tools of optimum quality.

Wet drilling bit accessories

Water liners

STARTEC XP-P

Cup wheels for universal tool manufacturing applications

STARTEC XP-P from TYROLIT is a byword for maximum efficiency and optimum tool quality in flute grinding. The product range will be expanded in future to include new shapes and specifications for machining clearance surfaces and face geometries on tungsten carbide stock-removal tools. An innovative bond system, tailored diamond qualities and new manufacturing technologies guarantee extremely high edge stability, low cutting forces and the best surface finish on the ground tool.

  • Maximum edge stability
  • Low grinding forces
  • System solution
  • Extremely rapid availability

PREMIUM*** Dry drill bits

DDE*** | in TGD®-technology

Perfect tool for installing sockets and junction boxes as well as smaller breakthrough jobs.

  • Consistently very fast cutting performance and noticeable smooth running
  • Long lifetime.

STARTEC PG-1

Grinding tools for high-speed external cylindrical longitudinal grinding

With the STARTEC PG-1 product line, for the first time TYROLIT is offering innovative roughing and finishing wheels for the peel grinding of tungsten carbide tool blanks in particular. A high-strength metal bond is used for the roughing wheel. This enables especially cost-effective and reliable process control. Long-life vitrified or metal bonds are used for the finishing wheel. This enables even large stock removal fluctuations to be compensated after roughing, and maximum surface quality to be achieved.

  • Maximum stock removal rate
  • Reduced grinding noise
  • Reduced wheel wear
  • Extremely rapid availability

PREMIUM*** Dry drill bits

DDL***-HH | in TGD®-technology

The newly developed premium dry drill bit for hand-guided drilling impresses in many respects. With TGD®-technology (TYROLIT GRAIN DISTRIBUTION), a unique technology developed by Tyrolit for the optimised distribution of grain.

  • Consistently very fast cutting performance and noticeable smooth running
  • Long lifetime.

STARTEC MT-1

Precision grinding wheels for producing high-precision micro tools

System solutions comprising high-precision grinding tools and specially designed dressing wheels make up the STARTEC MT-1 product line from TYROLIT. Bespoke diamond qualities and an innovative bond structure ensure low grinding forces and particularly high cutting efficiency during the grinding process. Minimal reject-part rates and optimum ground tool quality are the result.

  • Low grinding forces
  • Optimum edge retention
  • Easy profiling

STANDARD** Dry drill bits

DDL**

Quality tool for daily use, impressive performance and lifetime.

  • Quality tool

STRATO ULTRA

Vitrified bonded grinding wheels for surface and creep feed grinding.

Tyrolit is the market and technology leader in the field of high-porosity grinding wheels for creep feed grinding. With the STRATO product line, TYROLIT is setting new standards of quality and performance. It has now launched STRATO-ULTRA, representing the next generation of surface and creep feed grinding tools. Particularly in the turbine industry, STRATO ULTRA can be used instead of grinding tools with expensive sintered aluminium oxides without sacrificing performance. Sintered aluminium oxide reacts very aggressively to the dressing tool and consequently generates increased diamond wear. TYROLIT offers its customers profiled grinding tools. Depending on the profile depth, simple edge profiles and customised pre-profiling can significantly reduce set-up times (pre-profiling times) and associated dressing tool wear. Show more Show less

  • Reduced grinding times
  • Significantly better profile retention
  • Cool polished section
  • Increased wheel life
  • Approved for up to 63 m/s

BASIC* Dry drill bits

DDL*

Tool for installing sockets and junction boxes as well as smaller breakthrough jobs.

  • Tool for installing sockets and junction boxes

VIPER ULTRA

Vitrified bonded grinding wheels for surface and creep feed grinding.

With VIPER ULTRA, TYROLIT is setting a new benchmark in the field of creep feed grinding. The improved bonding of the grain and precisely controlled wetting enable the patented VIPER ULTRA bond system to coat the surface of the grain and so greatly improve grain bonding.

  • Reduced grinding times
  • Significantly better profile retention
  • Cool polished section
  • Increased wheel life

Dry drilling bits accessories

Connections for all common machines

Adapter suitable for all commercial machines - with and without soft impact drill bit connection: M16.

CENTURIA

Resin-bonded grinding tools for side grinding

With its CENTURIA product line, Tyrolit offers a complete range of conventional, resin-bonded tools for surface grinding. Different face grinding methods are used for rational production of functional surfaces with high requirements relating to evenness, plane parallelism and surface finish. Either both faces are machined simultaneously (double side face grinding), or just one face is machined using single wheels, segments, rings or cups. The components are often manufactured in mass production, which means that there are high requirements with respect to process stability. Show more Show less

  • Constant grinding properties even over a long period of use
  • Cool grinding (no burning)
  • Long service life of the grinding tool

Dry drilling bits accessories

Compact universal dust extraction system

Dust extraction adapter compatible with all drilling diameters.

Dry drilling bits accessories

Centring aids

Pilot drill with SDS connection or cone facilitates the precise positioning of the drill bits and enables exact results. When using a centring shaft, openings can also be made in 30 cm thick walls using 150 mm drill bits.

CENTURIA M, MP

Resin-bonded cup wheels for the surface grinding of taper rollers

With the CENTURIA M, and MP product lines, Tyrolit produces special products for the surface grinding of taper rollers. These cup wheels are manufactured in a multi-zone design, so that the pre-grinding and finish grinding can be carried out efficiently in one operation. The coarser inner zone ensures a high stock removal rate, the fine outer zone ensures a very low surface roughness on the flat surface of the taper rollers. Show more Show less

  • Long service life of the grinding tool
  • Good surface finish

COLUMBIA

Vitrified bonded grinding tools for internal cylindrical grinding

COLUMBIA grinding wheels from TYROLIT bridge the technological gap between grinding tools made of fused aluminium oxide and superabrasives. For internal cylindrical grinding applications, in particular, these products of specially bonded sintered aluminium oxide develop their full potential and make possible previously unparalleled levels of performance.

  • High quality of groundrings
  • The best economic efficiency
  • Maximum process stability

PREMIUM*** Tile drills

DDT***

TYROLIT vacuum brazed diamond coring bit for all ceramic tiles, fine stoneware and marble slabs. Maximum drilling comfort, suitable for universal use with M14 connection for angle grinders, and adapter for drilling machines. Suitable for dry and wet drilling. Perfect, chip-free drilling in tiled and sanitary areas.

  • Long lifetime
  • Fast, accurate drilling
  • Maximum drilling comfort

GENIS ROLL STAR

CBN GRINDING WHEEL FOR ROLL GRINDING

TYROLIT has developed a new generation of grinding wheels with a CBN layer and an innovative core for grinding rolls used in cold rolling mills. The GENIS ROLL STAR enables the cost-effective machining of ultra-hard rolls thanks to shorter grinding times and higher-quality surface results. The newly developed core of the GENIS ROLL STAR is vibration-damped and can be disposed of once the grinding layer is worn down. Show more Show less

  • Grinding ultra-hard materials
  • Universal machine use
  • Higher process stability
  • Universal use

CSS ROLL STAR

Roll grinding re-defined

The rolls must be continually reground due to fire cracks, wear and peeling of the roll surface. Roll grinding is a special form of external cylindrical grinding. It is used in sheet mills and in roll production. With the CSS-RS, TYROLIT offers the optimum grinding tool for this application.

  • Cuts costs – improves performance
  • Enables maximum lifetime
  • Reduces your grinding times
  • Guarantees the best surface finishes
  • Universal use for all roll materials and types

PREMIUM*** Tile drill-set Ø 5-14 mm

DDT***

The TYROLIT tile drill-set consists of universally applicable, vacuum-brazed diamond core bites for vacuum-brazed tile drill-set for universal use and maximum drilling comfort.

  • Tile drills Ø 5, 6, 8, 10, 12, 14 mm
  • Allen key

PREMIUM*** Tile drill kit

DDT***

The TYROLIT tile drill kit consists of universally applicable, vacuum-brazed diamond core bites for vacuum-brazed tile drill-set for universal use and maximum drilling comfort.

  • Tile drills Ø 5, 6, 8, 10, 12, 14 mm
  • Water bottle 1l
  • Drilling aid
  • Allen key

PREMIUM*** Tile drill set Ø 20+

DDT***

The TYROLIT tile drill set consists of universally applicable, vacuum-brazed diamond core bites for vacuum-brazed tile drill-set for universal use and maximum drilling comfort.

  • Tile drills Ø 5, 6, 8, 10, 12, 14 mm
  • Water bottle 1l
  • Drilling aid
  • Allen key

PREMIUM*** Tile drill set M14

DDT***

The TYROLIT tile drill set consists of universally applicable, vacuum-brazed diamond core bites for vacuum-brazed tile drill-set for universal use and maximum drilling comfort.

  • Tile drills Ø 6, 8, 10, 12, 20, 25, 35 mm
  • Allend key

PREMIUM*** Tile drill set XL

DDT***

The TYROLIT tile drill set consists of universally applicable, vacuum-brazed diamond core bites for vacuum-brazed tile drill-set for universal use and maximum drilling comfort.

  • Tile drills Ø 5, 6, 8, 10, 12, 14, 14, 20, 38, 52, 65, 75 mm
  • SDS Adapter, HEX Adapter, Center Drill Ø 7
  • Open-ended spanner SW 19, Hex key
  • 1 l water bottel (hose included)
  • Drilling aid

CSS WIRE ROLL

The solution for grinding tungsten carbide wire milling rolls

Our "roll pass" for grinding rod mills is called CSS WIRE ROLL – currently the best solution on the market. It is also a fully integrated system solution, including tools for re-trueing the grinding wheel and roughing stones for exposing the abrasive grain.

  • Long service life
  • High profile retention
  • Increased process stability
  • Complete system in TYROLIT quality

Dry drilling motor DME19DP***

Dry core drilling up to Ø 162 mm

Perfectly matched system for dry drilling reinforced concrete. The DME19DP*** in conjunction with TYROLIT TGD® dry drill bits is the solution for dry drilling applications in reinforced concrete. The practical centring aid ensures precise drill bit guidance and a longer diamond tool lifetime. Switchable soft impact function accelarates work progress, particularly in hard materials. The soft start and the LED indicator aid the user in selecting the optimal drilling speed. Show more Show less

  • System solution for dry drilling reinforced concrete.
  • Activatable/deactivatable soft impact function accelerates work progress.
  • Electronics for soft start and LED indicator for optimum drilling performance.

CSS CENTERLESS

Your partner for bar grinding

With a grinding wheel, regulating wheel and dressing tool, TYROLIT offers the complete range. By continually further developing our products, we can guarantee the best stock removal per grinding pass, the strictest tolerances and finest surfaces.

  • TYROLIT offers the complete system (grinding wheel, regulating wheel, dressing tools)
  • Reduced throughput times
  • Maximum stock removal rates
  • Lower dressing amounts
  • Maximum true running and shape accuracy

Drill motor DME22SU**

Core drilling up to Ø 180 mm

Ideal for electrical and installation work. The DME22SU** drill motor is ideal for electrical and installation work. It features a 3-speed transmission and variable speed setting with soft start. Integrated overload cut-outs and the PRCD safety switch ensure safe working. Dry drilling is also possible with the included M16 adapter. Show more Show less

  • Three-speed transmission for optimum rotational speeds.
  • Dry drilling with the included M16 adapter.
  • Comes in a handy transport case.

CSS REGULATOR

The regulating wheel for centerless grinding

Through the use of centreless grinding in through-feed and plunge cut grinding, round components can be produced with particular precision and efficiency. Here, the regulating wheel controls the grinding process and therefore has a decisive influence on the quality of the produced components. The CSS REGULATOR from TYROLIT is manufactured as a unitised version. The extremely high compaction ensures uniform quality of the regulating wheel. Show more Show less

  • Excellent profile retention
  • Good coefficient of friction
  • Constant grinding pressure

Drill motors DME20PW*** I DME20PU***

Core drilling up to Ø 180 mm

Efficient motor with very high drilling performance. The DME20*** drill motor provides impressive drilling performance in the power range up to 2 kW. The mechanical and electronic overload cut-out and the full metal housing ensure high reliability. Built-in performance and service indicators, as well as the levelling aid, also enable easy operation. The drill motor is suitable for universal use and covers a wide variety of application areas: manual/drill-rig guided and wet/dry (DME20PU***). Show more Show less

  • Performance and service indicator as well as levelling aid.
  • Compact and ergonomic design.
  • Quick changeover between wet and dry drilling with DME20PU***.

CSS ULTRA

High performance grinding tools for external cylindrical grinding and thread grinding

With CSS ULTRA, TYROLIT has managed to restructure the micro-architecture of the grinding wheel with lasting effect by using high quality components and innovative sintering technology. This enables the abrasive grain to withstand much greater loads during use without breaking away prematurely. These improvements result in maximum profile retention combined with minimal wear.

  • Optimum profile retention
  • Cool grinding (no burning)

Drill motors DME24MW*** I DME24UW***

Core drilling up to Ø 250 mm

Optimum handling due to extremely compact size and low weight. The low weight and extremely compact size are the highlights of the DME24*** and ensure perfect handling. The mechanical and electronic overload cut-out and the full metal housing ensure high reliability. Built-in performance and service indicators, as well as the levelling aid, also enable easy operation. The drill motor is available with different drill rig attachments (ModulDrill™ quick clamping system or universal plate). Show more Show less

  • Especially compact and light.
  • Performance and service indicator, as well as levelling aid.
  • Time saving drill rig mounting via ModulDrill™ quick change clamping system.

COOL CUT

Resin-bonded grinding tools for the cutting tool industry

Grinding tools specially developed for knife grinding , hollow grinding and back grinding. COOL CUT is suitable for cutting tools of all kinds: forged or stamped kitchen knives and pen knives, scalpels and razor blades, lawn and gardening shears, paper knives.

  • Cool polished section
  • Self-sharpening
  • Environmentally friendly
  • Two-layer wheels possible
  • Bond colours

Drill motors DME33MW*** I DME33UW***

Core drilling up to Ø 450 mm

High productivity due to optimum torque adjustment. Thanks to optimum torque adjustment, the DME33*** is an extremely powerful drill motor providing impressive productivity. The mechanical and electronic overload cut-out and the full metal housing ensure high reliability. Built-in performance and service indicators, as well as the levelling aid, also enable easy operation. The drill motor is available with different drill rig attachments (ModulDrill™ quick clamping system or universal plate). Show more Show less

  • Large drilling diameter range up to 450 mm.
  • Performance and service indicator as well as levelling aid.
  • Practical carrying handle.

Cool-Cut grinding tools

Flexible elastic grinding tools in resinoid bond

Resin-bonded grinding tools for the grinding, sharpening and polishing of cutting tools, such as scalpels and scissors.

  • Cool grinding
  • Long lifetime

SKYTEC XD-1

X-treme diamond content for ultimate performance in PCD and PCBN machining

"During the grinding process, all the work is performed by the abrasive grain." This central guiding principle has significantly shaped the development of the SKYTEC XD-1.The SKYTEC XD-1 product line impresses through a particularly high proportion of diamond grain, embedded in a specially developed bond. This results in excellent grinding performance and a long tool life. Show more Show less

  • Shorter grinding times
  • Maximum lifetime
  • High cutting-edge quality

SKYTEC BASIC+

Grinding tools für peripheral grinding of PCD and PCBN cutting inserts

TYROLIT offers the innovative SKYTEC BASIC+ product line for the economical production of PCD and PCBN cutting inserts. This proven series stands for precision geometry and minimal cutting-edge chipping. A bond system with increased porosity forms the centrepiece of this solution. Show more Show less

  • Better cutting ability
  • Stock range
  • Minimal cutting-edge chipping
  • Increased productivity

Core drilling system DRS162**

Core drilling up to Ø 162 mm

The ideal core drill entry model. The DRS162** drill system is the ideal core drill entry model. The drill motor and drill rig complement each other perfectly and form a single unit. The preset speed and compact, lightweight construction guarantee easy handling and user-friendliness. An integrated PRCD safety switch ensures maximum safety. Show more Show less

  • Powerful 2.5 kW motor.
  • One speed for drilling diameters up to 162 mm.
  • Space-saving attachment facility via dowel foot.

SKYTEC BOLT

The metal-bonded diamond grinding tool for the PowerGrind process

The innovative SKYTEC BOLT metal bond was specially developed for the patented Agathon PowerGrind process. Spark erosion enables the grinding wheel to be continuously and simultaneously dressed, sharpened and cleaned during the grinding process. The maximum chipping space and the permanent, easy cutting grinding wheel topography of the SKYTEC BOLT enable tool inserts to be machined with maximum economic efficiency.

  • Low grinding forces
  • Minimal chipping
  • Shorter grinding time

Drill rig DRA150**

Core drilling up to Ø 152 mm

Ideal for electrical and installation work. The DRA150** is extremely well-suited for electrical and installation work. This drill rig is suitable for 550 mm drill bits and angle drilling. A centre indicator, spirit level and carrying handle facilitate handling. Show more Show less

  • Integrated centre indicator.
  • Compact dowel foot.
  • Optional vacuum plate.

SOLOTEC

Grinding tools for peripheral grinding of tungsten carbide and metal-ceramic cutting inserts

The SOLOTEC product line from TYROLIT offers the perfect solution for the peripheral grinding of cutting inserts made from tungsten carbide and cermet. A range of newly developed bond systems with optimised strength and increased brittleness is used. When combined with new diamond qualities, the result is efficient grinding tools that improve the grinding process while simultaneously improving workpiece quality.

  • High stock removal rate
  • Reduced grinding forces
  • Universal use
  • System solution

Drill rig DRU160***

Core drilling up to Ø 160 mm

Lightweight under the drill rigs up to Ø 160 mm. The DRU160*** is the lightweight among drill rigs up to Ø 160 mm. The standardised clamping collar system enables quick mounting of common drill motors. In addition, a centre indicator, angle indicator and spirit level enhance user-friendliness and help save valuable time during drill rig set-up. The anchor or vacuum attachment facility also increase flexibility. Show more Show less

  • Precision work due to high quality support with sturdy roller guide.
  • Universal field of application thanks to 90°-45° diagonal adjustment.
  • Efficient drill rig set-up using a standard centre indicator.

MICROTEC

Band-finishing in the automotive and components industry

Products on special polyester film are used to create defined surface structures in the automotive and components industry.

  • Constant and precise surface structure
  • High stock removal and finishing performance
  • Grain selection for defined and reproducible roughness values
  • Products for specific processes, optimised for your application
  • Ultimate process stability and reliable quality

Drill rigs DRA250*** I DRU250***

Core drilling up to Ø 250 mm

Impressive stability and drilling performance with sturdy processing and robust drilling columns - wide gear teeth. The DRA250***/DRU250*** drill rigs offer impressive stability and drilling performance thanks to sturdy workmanship and robust drilling columns with wide gear teeth. The optimised support with sturdy roller guide guarantees precise drilling. The proven ModulDrill quick clamping system enables fast and secure mounting of drill motors. In addition, a centre indicator (DRU250***), angle indicator and two-speed feed gear enhance user-friendliness and help save valuable working time. The compact lightweight construction for easy transport, assembly and disassembly complete the system. Show more Show less

  • ModulDrill quick change clamping system – quick, easy and safe drill motor attachment.
  • Non-strenuous, ergonomic working thanks to fine feed operation (i=1:3.5).
  • DRU250*** with aluminium dowel-vacuum base. Drilling in the most restricted space with steel dowel foot DRA250***.

Conventional grinding wheels for flute grinding

For HSS tools

For grinding the chip flute, the focus is on precise geometry and optimum hardness of the tool's cutting edge. With tried and tested flute grinding wheels from TYROLIT, these requirements are perfectly satisfied thanks to maximum stock removal rates and cool grinding. The result is significantly lower machining costs and enhanced workpiece quality.

  • Universally suitable for all flute grinding machines, e.g. Junker, Gühring, Haux, etc.
  • Higher stock removal rate reduces grinding time
  • Minimal thermal load on the tool
  • High profile retention

Drill rig DRU350***

Core drilling up to Ø 350 mm

Easiest drilling of bores in walls, ceiling and floors thanks to intelligent design with drilling and gripping column that can be rotated by 360°. Thanks to its intelligent design with drilling and gripping column that can be rotated by 360°, the DRU350*** enables the drilling of holes in walls, ceilings and floors. The drill rig can be mounted in a time saving and material protecting manner via an innovative telescope clamping system. Various settings options, an extended drilling column and a variety of drill accessories ensure universal use. Show more Show less

  • Maximum flexibility thanks to drilling and gripping column that can be rotated by 360°.
  • Quick assembly and disassembly thanks to innovative telescope clamping system.
  • Easy diagonal drilling due to intelligent design.

Drill rigs DRA400*** I DRU400***

Core drilling up to Ø 400 mm

The professional core drilling system for the most versatile fields of application. DRA400*** and DRU400***, the professional core drilling systems for a versatile application range. The optimised support with sturdy roller guide guarantees precise drilling. The proven ModulDrill quick clamping system enables fast and secure mounting of drill motors. In addition, a centre indicator, angle indicator and two-speed feed gear enhance user-friendliness and help save valuable working time. The compact lightweight construction for easy transport, assembly and disassembly complete the system. Show more Show less

  • Easily adjustable and interchangeable low wear roller guide.
  • Easy diagonal drilling thanks to angle indicator.
  • DRA400*** with steel dowel foot. DRU400*** vacuum fixing - drilling or dowel fixing.

Honing and superfinishing stones

Vitrified and resin-bonded tools for honing and superfinishing

Honing and superfinishing stones are made from conventional abrasives (aluminium oxide and silicon carbide) as standard. However, Tyrolit also produces these tools using superabrasives (diamond and CBN). Honing and superfinishing is used on components with especially high demands concerning the surface finish and geometry. The demands on the honing and superfinishing stones are also correspondingly high. Show more Show less

  • Consistent quality
  • Good stock removal
  • Good surface finish

SKI & BOARD

Vitrified bonded grinding tools for the ski industry

Open-pore grinding tools for machining base surfaces. The special feature is the machining of plastic coatings and steel edges in one operation. Grinding wheels also produce a considerably flatter coating surface (base surface) than an abrasive belt.

  • Self-sharpening
  • Cool polished section

Drill rig DRA500*** electric

Core drilling up to Ø 500 mm

Maximum stability and drilling performance for the highest demands. The DRA500***, a drill rig for maximum stability and the highest demands during drilling. The proven ModulDrill quick clamping system enables fast and secure mounting of drill motors. Thanks to an extended drilling column, even long through-holes can be made with ease. Thanks to the modular design, combined use with TYROLIT cable saws and hydraulic equipment is possible without difficulty. Show more Show less

  • Drilling column extensions from 230 to 910 mm.
  • Maximum load capacity due to extra wide, high quality drilling column gearing.
  • Maximum load capacity due to extra wide, high quality drilling column gearing.

THERMO

Elastic-bonded grinding tools for the thermal glass industry

Grinding tools developed in-house for removing the metal layer from insulation glass. Can also be used for various machine systems, including stationary moving top platen machines and hand-held machines.

  • Damping effect
  • Wet and dry grinding
  • Core
  • Self-sharpening

Drill rig DRA500*** hydraulic

Core drilling up to Ø 500 mm

Cost-effective drilling with hydraulic drill and feed motor. The DRA500***, a drill rig for maximum stability and the highest demands during drilling. The proven ModulDrill quick clamping system enables fast and secure mounting of drill motors. Thanks to an extended drilling column, even long through-holes can be made with ease. Thanks to the modular design, combined use with TYROLIT cable saws and electric equipment is possible without difficulty. Show more Show less

  • Time saving drill motor mounting via ModulDrill quick clamping system.
  • Continuously variable drilling adjustment with powerful hydraulic feed.
  • Maximum stability with sturdy, two-piece pillar support at the rear.

DIAMANT

Diamond ring wheels for the electronics industry

Diamond grinding tools for machining wafers (silicon) in the microchip industry. For an optimum result we recommend grinding tools with diamond in resin and vitrified bonding systems.

  • Cool polished section
  • Good surface finishes

Drill rig BC-2 electric

Core drilling up to Ø 1000 mm

Perfect for drilling large bores. The BC-2 is ideal for drilling large holes up to 1000 mm. Thanks to the modular design, combined use with TYROLIT cable saws and hydraulic equipment is possible without difficulty. The dual-column guidance principle and a two-speed feed gear enable user friendly work and low weight. A large selection of drill accessories rounds off the range. Show more Show less

  • High stability yet low weight thanks to 2-pillar guide system.
  • Bores with a diameter of up to 1000 mm with ModulDrill distance plates.
  • Effortless drilling thanks to two speed feed gearbox i=1:2 and i=1:9.

Diamond grinding tool

For machining technical ceramic components

TYROLIT offers a comprehensive range of products for machining ceramic components. These include various application-specific bond systems with optimised performance in conjunction with new diamond qualities.

  • Reduced wheel wear
  • High stock removal rate
  • Low grinding forces

Drill rig BC-2 hydraulic

Core drilling up to Ø 1000 mm

Cost-effective drilling with hydraulic drill and feed motor. The BC-2 is ideal for drilling large holes up to 1000 mm. Thanks to the modular design, combined use with TYROLIT cable saws and electric equipment is possible without difficulty. The dual-column guidance principle and a two-speed feed gear enable user friendly work and low weight. A large selection of drill accessories rounds off the range. Show more Show less

  • Gear reduction arms allow the drilling of bores up to 1000 mm in diameter.
  • Powerful drilling with hydraulic feed.
  • High stability yet low weight thanks to 2-pillar guide system.

Modular electric drilling gearbox DGB1000***

Core drilling up to Ø 1000 mm

Quick and easy drilling of large and deep bores. In accordance with the TYROLIT modularity principle, the DGB1000*** delivers optimum rotational speeds and impressive performance in conjunction with either the electric high-frequency motor or hydraulic standard motor options, by means of 8 transmission stages – two speeds at the drilling gear box and up to four stages via the relevant drive. With optimised drill bit attachment for large diameters and high torques. Show more Show less

  • Optimised drill bit attachment for large bore drilling.
  • ModulDrill quick change clamping system for quick, easy and safe attachment.
  • Bores with a diameter of up to 1000 mm with ModulDrill distance plates.

DIAMANT

Diamond mounted points for electronic components

Grinding tools exclusively with diamond in electroplated bond systems.

  • High dimensional accuracy

DIAMANT + CBN

Diamond and CBN grinding tools for medical technology

Tyrolit offers diamond grinding tools in special shapes and dimensions for machining hip joints (ceramic materials) and CBN grinding tools in special honing sleeve designs for machining hip joints of steel and alloys.

  • Long lifetime
  • Minimal support layer height

Modular hydraulic drilling gearbox DGB1000***

Core drilling up to Ø 1000 mm

Quick and easy drilling of large and deep bores. In accordance with the TYROLIT modularity principle, the DGB1000*** delivers optimum rotational speeds and impressive performance in conjunction with either the electric high-frequency motor or hydraulic standard motor options, by means of 8 transmission stages – two speeds at the drilling gear box and up to four stages via the relevant drive. With optimised drill bit attachment for large diameters and high torques. Show more Show less

  • Optimised drill bit attachment for large bore drilling.
  • ModulDrill quick change clamping system for quick, easy and safe attachment.
  • Bores with a diameter of up to 1000 mm with ModulDrill distance plates.

DIAMANT + VIB Star TK

Diamond grinding tools with VIB-Star core for technical ceramic components

Diamond grinding tools with cushioning plastic core system for machining very hard materials and technical ceramic components. Straight diamond grinding tools in vitrified bond for the machining of ceramic components require special damping, thus VIBSTAR is only available in certain dimensions on request.

  • Damping + low weight
  • Better surface finishes
  • Longer lifetime
  • Improved grinding ratio

PREMIUM*** Dry cutting saw blade

DCU*** 4in1 | in TGD®-technology

Materials able to be machined: universal building materials, such as concrete, natural stone, clay brick, cellular concrete, etc. The DCU***4in1 dry cutting saw blade impresses with excellent results when cutting concrete, hard stone, abrasive materials and steel. The possibility for universal use offers the user a product which is ready-to-use at any time without a wheel change and ensures the successful completion of a project. Show more Show less

  • Low cutting costs
  • Reduced load for the user
  • Universal use
  • Consistently fast cutting performance, very long lifetime and noticeable smooth running

ELASTIC

Elastic for tuning the edges of skis

We developed our resin-bonded ELASTIC grinding tools specifically for machining steel edges. These are used in a cup wheel version for machining the steel edges on the sides of skis.

  • Cool polished section
  • Self-sharpening
  • Core

PREMIUM*** Dry cutting saw blade

DCU***

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Very easy cutting
  • Broad product range.

ELASTIC

Elastic for the watchmaking industry

Elastic-bonded grinding and polishing tools for the machining of precision components. These are mainly used for precision mechanics in the watchmaking, spectacle and jewellery industries. Our ELASTIC grinding tools were adapted for diverse applications and are used in the deburring, effect grinding, fine grinding and polishing of precision components.

  • Adaptable (elastic)
  • Wet and dry grinding
  • Large range of grit sizes
  • Bond versions

PREMIUM*** Dry cutting saw blade

DCU***-FC 4in1

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Very easy cutting
  • Broad product range.

PREMIUM*** Dry cutting saw blade

DCU***-S | in Silent design

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Silent design
  • Broad product range.

ELASTIC CENTERLESS WHEEL

Grinding wheels in elastic bond for the centreless grinding of taper rollers

For the centreless grinding of taper rollers, a steel profiled regulating wheel is used. A certain elasticity of the grinding wheel is required so that the rollers can still be operated safely. The Tyrolit centreless wheel in elastic bond has proven highly effective.

  • Good profile retention and lifetime
  • Good coefficient of friction

STANDARD** Dry cutting saw blade

DCU**

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Impressive performance and lifetime.

Elastic grinding tools for the machining of implants/prostheses

Flexible elastic grinding tools in resinoid bond.

Fine grinding, removal and pre-polishing of silicon carbide in resinoid bond.

  • Can be easily adapted to contours
  • Generation of the widest range of surface structures (matting, polishing)

STANDARD** Dry cutting saw blade

DCU**-FC

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, steel, etc.

  • Universal use
  • Impressive performance and lifetime.

Elastic metal decorating tools

Elastic grinding wheels for the removal of metallised ceramic components

Elastic grinding tools in resinoid bond.

  • Flexible
  • Long lifetime
  • Self-adhesive foil possible

BASIC* Dry cutting saw blade

DCU*

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

  • Universal use
  • Cost-effective performance and lifetime.

Ceramic grinding tools

Grinding tools in vitrified bond for the grinding of skate blades.

Hollow grinding with vitrified bonded grinding tools.

  • Profile retention
  • Good stock removal rate
  • High economic efficiency

BASIC* Dry cutting saw blade

DCU*-FC

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

  • Universal use
  • Cost-effective performance and lifetime.

Grinding tools for the machining of hip and knee joints

Ceramic bonded diamond grinding tools  

Machining of ceramic insert cups in wet grinding (oil).

  • Ceramic abrasive layer with low metal support
  • Maximum surface quality

PREMIUM*** Dry cutting saw blade

DCC***

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

  • Very easy cutting
  • Broad product range.
  • Maximum performance and lifetime.

Grinding tools for the machining of hip joints

Resin and ceramic bonded grinding tools for the machining of steel hip joints.

Machining of steel hip joints in wet grinding using honing sleeves.

  • Suitable for various steel alloys.
  • Long lifetime

PREMIUM*** Dry cutting saw blade

DCC***-FC Wall chaser blade

Materials able to be machined: Concrete, clay brick, cellular concrete. Details: tool for the milling of slots in concrete and masonry. For use with all common wall chasers.

  • Broad product range.
  • Maximum performance and lifetime.
  • Maximum performance and lifetime.

Grinding tools in BY systems for the machining of hypodermic needles

Silicon carbide grinding tools in self-sharpening resinoid bond systems.

Resin-bonded grinding tools for the pointing of hypodermic needles.

  • Burr-free finish
  • Long lifetime
  • Best surface finishes

STANDARD** Dry cutting saw blade

DCC**

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

  • Impressive performance and lifetime.
  • Reliable quality.

Grinding tools for the machining of industrial knives

Grinding tools in ceramic and resinoid bond.

Pre and finish grinding (polishing) mostly with resinoid bonds in wet grinding.

  • High stock removal rate in the shortest time
  • Good surface finishes

PREMIUM*** Dry cutting saw blade

DCH***-FC

The DCH***-FC from TYROLIT enables the user to carry out cutting work swiftly and to precise dimensions, without any great exertion. The DCH***-FC is an ultra-thin diamond cut-off wheel with a segment thickness of 1.2 or 1.9 mm. It is distinguished by an extremely high cutting ability with minimal dust generation and extremely smooth running.

  • Extremely high stock removal rate
  • Minimal effort
  • Health benefits
  • Very clean, chip-free cutting edges

AMIGO

CBN grinding wheels for dry grinding HSS tools

The proven CBN dry grinding wheels from the TYROLIT AMIGO product line meet these requirements perfectly. The highest stock removal rates and cool grinding can be achieved at the same time. As a result, machining costs are significantly lower and workpiece quality is increased.

  • Universal use on all manual tool grinding machines
  • Low wear
  • Minimal thermal load on the tool
  • Higher stock removal rate reduces grinding time

PREMIUM*** Dry cutting saw blade

DCH*** | in TGD®-technology

Materials able to be machined: Concrete blocks, granite, gneiss, porphyry, paving slab, etc. Details: the DCH*** dry cutting saw blade, specially developed using TGD®-technology for hard stone, impresses with its cutting ability and smooth running. Reduced effort over the entire lifetime allows for higher productivity. The perfectly optimised segments for the application create very clean, chip-free edges and ensure a flawless result. Show more Show less

  • Low cutting costs
  • Reduced load for the user
  • No reworking
  • Consistently fast cutting performance, very long lifetime and noticeable smooth running

DIAGO

Diamond grinding wheels for dry grinding tungsten carbide tools

The proven diamond dry grinding wheels from the TYROLIT DIAGO product line meet these requirements perfectly. The highest stock removal rates and cool grinding can be achieved at the same time. As a result, machining costs are significantly lower and workpiece quality is increased.

  • Universal use on all manual tool grinding machines
  • Low wear
  • Minimal thermal load on the tool
  • Higher stock removal rate reduces grinding time

SECUR cut-off wheels

The innovative solution for cut-off grinding

Cut-off grinding – a cutting process with undefined edges – is frequently used in steel mills due to its excellent performance and economic efficiency. With SECUR, TYROLIT offers the ideal tool for every cutting application. Available with a diameter of up to 2,000 mm.

  • Optimises your process costs
  • Enables innovative customised solutions
  • Achieves the best cutting quality
  • Ultimate product safety

PREMIUM*** Dry cutting saw blade

DCH***

Materials able to be machined: Granite, gneiss, porphyry, paving slab, hard limestone, etc.

  • Maximum performance and lifetime.
  • Broad product range.

SECUR SUPER THIN

Super thin, super sharp!

The innovative wheel design enables a wheel thickness that is reduced by approx. 20% and is therefore particularly suitable for low-performance machines. Available with a diameter of up to 2,000 mm.

  • High wheel stability
  • For low-performance machines
  • Minimal cutting losses

BASIC* Dry cutting saw blade

DCH*

Materials able to be machined: Granite, porphyry, paving slab, hard limestone, etc.

  • Cost-effective performance and lifetime.
  • High quality.
  • Efficient.

SECUR EASY CUT

Cut-off wheels in the steel industry for materials with high internal stresses

TYROLIT has developed the SECUR Easy Cut product line with the specific aim of increasing process stability when cutting large workpieces in materials with high internal stresses. The unique combination of conical wheel shape and a completely re-defined wheel topography – with particularly easy cutting side surfaces – reduces the risk of jamming during cutting.

  • Reduced risk of jamming
  • White cut
  • Maximum process stability

PREMIUM*** Dry cutting saw blade

DCAB***

Materials able to be machined: abrasive concrete, cellular concrete, floor pavement, plaster, pumice stone, etc.

  • Suitable for abrasive materials
  • From a diameter of 230 mm upwards with inclined protective segments to guard against segment loss
  • Maximum performance and lifetime.

SECUR LAB

Laboratory cut-off wheels for metallurgical sample material

The first work step of materialographic sample preparation is cutting the sample, which must be done as quickly as possible and must not cause irreparable damage to the sample. This means no thermal structural alterations, no deformation, no cracks. With SECUR LAB we offer the ideal cut-off wheel for a variety of materials, workpiece dimensions and hardnesses.

  • A smooth cut
  • Precise cutting areas
  • Clean cut-off surfaces
  • High resistance to cooling lubricants
  • Colour coded wheels

PREMIUM*** Dry cutting saw blade

DCAB***-tuck point blade

Materials able to be machined: mortar joints. Details: tool for milling and repairing mortar joints.

  • Suitable for abrasive materials
  • Maximum performance and lifetime.
  • Broad product range.

SECUR-EXTRA cut-off wheels

The innovative solution for cut-off grinding

SECUR-EXTRA is tough on every casting challenge. This range was developed specially for the harsh requirements of the foundry industry. With its zirconia alumina combined with new bond systems, it ensures optimum cutting ability, low vibration, a long lifetime and the best price-performance ratio for your cutting process. Special production processes and extensive technical safety tests guarantee maximum working safety combined with operating speed and cutting performance. Common operating speeds are 80 m/s and 100 m/s. Show more Show less

  • Maximum product quality
  • Long service life
  • Optimum cutting quality

BASIC* Dry cutting saw blade

DCAB*

Materials able to be machined: abrasive concrete, cellular concrete, floor pavement, plaster, pumice stone, etc.

  • Suitable for abrasive materials
  • Cost-effective performance and lifetime.
  • Efficient.

PREMIUM*** Dry cutting saw blade

DCM***

Materials able to be machined: marble, fibreglass reinforced plastic, PVC, carbon fibre, composites, fibreglass, bulletproof glass, etc. Details: with electroplated coating, also suitable for rescue operations.

  • Universal use for marble, fibreglass reinforced plastic, PVC, carbon fibre, composites
  • Also suitable for rescue operations

Grinding tools for cutting

Cut-off wheels for the tool industry

Resin-bonded CBN and diamond grinding wheels for cutting tungsten carbide and HSS cutting tools.

  • Perfect cutting quality
  • Low wear
  • High cutting ability
  • Low heat build up

PREMIUM*** Dry cutting saw blade

DCT***

Materials able to be machined: Ceramic tile, fine stoneware, porcelain. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

  • Chip-free cutting edges
  • Very easy cutting
  • Maximum performance and lifetime.

STARTEC-BASIC

Optimised grinding tools for re-sharpening cutting tools

The STARTEC-BASIC product line provides reliable quality for re-sharpening rotating cutting tools. Continuous product improvements form the basis for maximum productivity and optimum tool quality.

  • Innovative resinoid bonds
  • Highest quality diamond and CBN materials
  • Extensive stock range

DIAMOND PROFILE ROLLER DRESSER

Electroplated rollers for dressing and sharpening grinding tools

TYROLIT diamond roller dressers are used mainly in the turbine, automobile and tool manufacturing industries.

  • High profile accuracy
  • High economic efficiency
  • Long service life

BASIC* Dry cutting saw blade

DCT*

Materials able to be machined: Ceramic tiles.

  • Chip-free cutting edges
  • Cost-effective performance and lifetime
  • Efficient

SECUR-HIGH PERFORMANCE

Your Choice for High Performance

Many types of steel exhibit surface flaws, scale and areas of decarburisation after continuous casting. As a result, the semi-finished products cannot be conveyed to the rolling mill without the need for trimming beforehand. Here, the grinding wheel is an integrative element that comes into its own – it is vital for enabling cost-efficient trimming that conforms to technological requirements. TYROLIT satisface todas las exigencias con la muela abrasiva de alta presión SECUR HP. Show more Show less

  • Superior grinding power
  • Improved white cut performance
  • Optimises grinding costs
  • Problem-free working - maximum safety throughoptimum quality

PREMIUM*** Dry cutting saw blade

DCU***4in1 | in TGD®-technology

Materials able to be machined: Universal building materials, such as concrete, natural stone, clay brick, cellular concrete, etc. Details: the DCU***4in1 dry cutting saw blade impresses with excellent results when cutting concrete, hard stone, abrasive materials and steel. The possibility for universal use offers the user a product which is ready-to-use at any time without a wheel change and ensures the successful completion of a project. Show more Show less

  • Low cutting costs
  • Reduced load for the user
  • Universal use
  • Consistently fast cutting performance, very long lifetime and noticeable smooth running

FOCUR-SA

Diamond tools for automatic fettling

Deburring and trimming spheroidal and grey cast iron parts on automated fettling machines. Practical experience shows that combining FOCUR-SA with conventional tools provides the most efficient solution. Our application engineers will be delighted to help you optimise your grinding process with the FOCUR-SA. Show more Show less

  • High economic efficiency
  • Maximum lifetime
  • Maximum precision and surface quality
  • Reduced noise and dust emissions
  • No finishing required

PREMIUM*** Dry cutting saw blade

DCU***

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc.

  • Universal use
  • Very easy cutting
  • Maximum performance and lifetime.

FOCUR-EXTRA cut-off wheels

Cutting castings with the angle grinder

FOCUR-EXTRA is tough on every casting challenge. This range was developed specially for the harsh requirements of the foundry industry. With its zirconia alumina combined with new bond systems, it ensures optimum cutting ability, low vibration, a long lifetime and the best price-performance ratio for your cutting process.

  • Less effort required through high cutting ability
  • Clean cutting quality
  • Long lifetime
  • Produced according to stringent quality standards
  • Ultimate product safety

STANDARD** Dry cutting saw blade

DCU**

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc.

  • Impressive performance and lifetime.
  • Reliable quality.

FOCUR-EXTRA roughing wheels

Working on castings with the angle grinder.

FOCUR-EXTRA is tough on every casting challenge. This range was developed specially for the harsh requirements of the grinding process in the foundry industry. With its zirconia alumina combined with optimised bond systems, it ensures optimum cutting ability, low vibration strain, a long lifetime and a cost-efficient grinding and cutting process.

  • Less effort required through high cutting ability
  • High-quality zirconia alumina in new bond systems enables the longest possible lifetime
  • Tough on all cast materials, even mineralised cast iron
  • Superior running characteristics thanks to new wheel design and innovative production technology
  • Produced according to stringent quality standards

STANDARD** Dry cutting saw blade

DCU**-FC

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc.

  • Impressive performance and lifetime.
  • Reliable quality.

FOCUR-EXTRA for pedestal and pendular grinding

Manual machining of cast workpieces on pedestal and swing frame grinders.

In most abrasive mixtures, zirconia alumina is used for grinding cast materials, enabling much shorter grinding times, higher stock removal rates and longer lifetimes to be achieved.

  • Less effort required through high cutting ability
  • High performance and optimised efficiency
  • Individually tailored products for your grinding application
  • Ultimate safety for manual grinding work
  • Available in all standard sizes (on request)

BASIC* Dry cutting saw blade

DCU*

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

  • Cost-effective performance and lifetime.
  • High quality.
  • Efficient.

FOCUR-EXTRA VIB-STAR roughing wheels

Working on castings with the angle grinder.

The vibration damping developed by TYROLIT and the innovative multi-layer structure of the new VIB-STAR roughing wheel allows professional users to achieve especially gentle grinding. The innovative wheel design considerably reduces the vibrations to which the grinder is exposed. The new VIB-STAR technology helps to prevent occupational illnesses such as muscular and skeletal damage, neurological illnesses and circulatory problems. Show more Show less

  • Considerably reduced vibration strain
  • Optimised smooth running
  • Increased machine lifetime

BASIC* Dry cutting saw blade

DCU*-FC

Materials able to be machined: Universal building materials, such as concrete, clay brick, natural stone, etc. Details: A 20-16 mm reduction bush is supplied with a disc diameter of 105 mm.

  • Cost-effective performance and lifetime.
  • High quality.
  • Efficient.

FOCUR SA

Diamond cut-off wheel for grey and spheriodal cast iron

FOCUR SA diamond cut-off wheels from TYROLIT are the optimum tool for machining grey and spheroidal cast iron. These products combine a long lifetime with maximum economic efficiency. FOCUR SA cut-off wheels are available in diameters from 178 to 600 mm.

  • Lifetime
  • Economic efficiency
  • Working convenience
  • Quality

PREMIUM*** Dry cutting saw blade

DCC***

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

  • Universal use
  • Very easy cutting
  • Maximum performance and lifetime.

Other tools for automatic casting cleaning

The cost-efficient solution for the foundry industry

TYROLIT offers know-how and application expertise in the use of ring wheels, grinding segments, stable-edge grinding wheels and diamond tools.

  • Clean cutting quality
  • Long lifetime
  • Ultimate product safety
  • Customised solutions

STANDARD** Dry cutting saw blade

DCC**

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

  • Impressive performance and lifetime.
  • Reliable quality.

Mounted points

For straight grinders and flexible shafts

In foundries, the use of straight grinders and flexible shafts is growing in importance, especially for applications such as: Grinding out cavities, bores, blind holes, ridges or flutes - Grinding shrink holes and oxidisation effects in hard-to-access locations - Cost-effective deburring, bevelling and edge breaking

  • Maximum stock removal rates
  • Optimised lifetime
  • High working safety
  • Precise true running
  • Universally suitable (for a variety of materials and workpieces)

STANDARD** Dry cutting saw blade

DCC**-LL

Materials able to be machined: concrete, reinforced concrete, concrete products, hard materials, etc.

  • Long tool life
  • Impressive performance and lifetime.
  • Reliable quality.

PREMIUM*** Dry cutting saw blade

DCH*** | in TGD®-technology

Materials able to be machined: Concrete blocks, granite, gneiss, porphyry, paving slab, etc. Details: the DCH*** dry cutting saw blade, specially developed using TGD®-technology for hard stone, impresses with its cutting ability and smooth running. Reduced effort over the entire lifetime allows for higher productivity. The perfectly optimised segments for the application create very clean, chip-free edges and ensure a flawless result. Show more Show less

  • Consistently fast cutting performance, very long lifetime and noticeable smooth running
  • Maximum performance and lifetime.
  • Broad product range.

PREMIUM*** Dry cutting saw blade

DCH***

Materials able to be machined: Granite, gneiss, porphyry, paving slab, hard limestone, etc.

  • Very easy cutting
  • Maximum performance and lifetime.
  • Broad product range.

BASIC* Dry cutting saw blade

DCH*

Materials able to be machined: Granite, porphyry, paving slab, hard limestone, etc.

  • Cost-effective performance and lifetime.
  • High quality.
  • Efficient.

PREMIUM*** Dry cutting saw blade

DCA***

Materials able to be machined: Asphalt, sandstone, extremely abrasive materials. Details: protective segments against the undercutting-effect.

  • Inclined protective segments guard against segment loss
  • Maximum performance and lifetime.
  • Broad product range.

PREMIUM*** Dry cutting saw blade

DCA+C***-2in1

Materials able to be machined: asphalt, green concrete with soft to hard material aggregates and a small amount of cured concrete. Details: protective segments against the undercutting-effect.

  • Inclined protective segments guard against segment loss
  • Increased flexibility
  • Can also be used on floor saws and for wet cutting

STANDARD** Dry cutting saw blade

DCA**

Materials able to be machined: Asphalt, sandstone, extremely abrasive materials. Details: protective segments against the undercutting-effect.

  • Inclined protective segments guard against segment loss
  • Impressive performance and lifetime.
  • Reliable quality.

BASIC* Dry cutting saw blade

DCA*

Materials able to be machined: Asphalt, sandstone, extremely abrasive materials.

  • Inclined protective segments guard against segment loss
  • Cost-effective performance and lifetime.
  • High quality.

PREMIUM*** Dry cutting saw blade

DCM***

Materials able to be machined: marble, fibreglass reinforced plastic, PVC, carbon fibre, composites, fibreglass, bulletproof glass, etc. Details: with electroplated coating, also suitable for rescue operations.

  • Universal use for marble, fibreglass reinforced plastic, PVC, carbon fibre, composites
  • Also suitable for rescue operations
  • Maximum performance and lifetime.

PREMIUM*** Diamond cup wheel

DGU***

Materials able to be machined: Concrete, natural stone and general building materials. Details: with PU foam coating for quiet grinding and shaping of corners and edges.

  • Quiet grinding and clean shaping of corners and edges
  • Maximum performance and lifetime.
  • Broad product range.

STANDARD** Diamond cup wheel

Single row DGU**

Materials able to be machined: Concrete, natural stone and general building materials. Details: single row segments for high stock removal. A 22, 23-16 mm reduction bush is supplied.

  • High stock removal rate
  • Impressive performance and lifetime.
  • Reliable quality.

STANDARD** Diamond cup wheel

Double row DGU**

Materials able to be machined: Concrete, natural stone and general building materials. Details: double row segments for medium stock removal and long lifetime. A 22, 23-16 mm reduction bush is supplied with wheel diameters of 100 and 110 mm.

  • Medium-high stock removal rate and long lifetime
  • Impressive performance and lifetime.
  • Reliable quality.

STANDARD** Diamond cup wheel

DGU**-Turbo

Machinable materials: Concrete, natural stone and general building materials. Details: turbo style arranged segments for a fine grinding surface pattern and shaping of corners and edges. Quick dust removal. A 22, 23-16 mm reduction bush is supplied with a wheel diameter of 100 mm.

  • Fine grinding surface pattern and clean shaping of corners and edges
  • Quick dust removal
  • Impressive performance and lifetime.

PREMIUM*** Hand-held saw blade

HSL*** | in TGD®-technology

Materials able to be machined: usage on reinforced or normal concrete with wall thicknesses of up to 15 cm. Details: application in system with fuel operated, electric or hydraulic cut-off machines.

  • Consistently very fast cutting performance and noticeable smooth running.
  • Long lifetime.
  • Broad product range.

PREMIUM*** Hand-held saw blade

HSM***

Materials able to be machined: usage on reinforced or normal concrete with wall thicknesses of up to 15 cm. Details: application in system with fuel operated, electric or hydraulic cut-off machines.

  • Consistently very fast cutting performance and noticeable smooth running
  • Long lifetime.

PREMIUM*** Ring saw blade

RSL*** | Ø 406 mm / 506 mm

Materials able to be machined: usage on reinforced or normal concrete with wall thicknesses of up to 40 cm (Ø 506 mm) / 30 cm (Ø 406 mm). Details: the ring saw blades have been optimised to work perfectly with the TYROLIT HRG500*** Hydrostress machine. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade .

  • Universal use..

PREMIUM*** Ring saw blade

RSL*** | Ø 366

Materials able to be machined: usage on reinforced or normal concrete with wall thicknesses of up to 26 cm (Ø366 mm). Details: the ring saw blades have been optimised to work perfectly with the TYROLIT HRG500*** Hydrostress machine. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade .

  • Universal use..

PREMIUM*** Ring saw blade

RSL***-C | Ø 406 mm

Materials able to be machined: usage on reinforced or normal concrete with wall thicknesses of up to 30 cm (Ø 406 mm). Details: the ring saw blades have been optimised to work perfectly with the TYROLIT HRG500*** Hydrostress machine. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade .

  • Universal use..

PREMIUM*** Ring saw blade

RSL***-FC | Ø 306 mm / 406 mm

Materials able to be machined: usage on reinforced or normal concrete with wall thicknesses of up to 30 cm (Ø 406 mm). Details: the ring saw blades have been optimised to work perfectly with the TYROLIT HRG500*** Hydrostress machine. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade .

  • Universal use..

PREMIUM*** Ring saw blade

RSM*** | Ø 366 mm

Materials able to be machined: usage on reinforced or normal concrete with wall thicknesses of up to 26 cm. Details: application in system with fuel operated, electric or hydraulic ring saw machines. With every replacement blade the wear plate is included and should also be replaced with each ring saw blade.

  • Universal use..

Ring saw HRH500***

Cutting depth up to 400 mm

Unique, hydraulic hand-held saw for cutting to 400 mm. The HRH500*** is a unique, hydraulic hand saw for wall and floor cuts to 400 mm. The ring saw prevents overcuts and therefore offers an alternative to corner drilling and diamond chain saws. The patented, self-torque and anti-slip drive roller system ensures excellent power transfer and prevents slippage. An optional flow divider permits use with a variety of hydraulic drive systems. Show more Show less

  • Patented drive roller system
  • Unique cutting depth up to 400 mm.
  • Optional flow divider for use with hydraulic power packs.

Ring saw HRG500***

Cutting depth up to 400 mm

Unique, petrol-powered hand saw for wall and floor cuts to 400 mm. The HRG500*** is a unique, petrol-powered hand saw for wall and floor cuts to 400 mm. The ring saw prevents overcuts and therefore offers an alternative to corner drilling and diamond chain saws. The patented, self-torque and anti-slip drive roller system ensures excellent power transfer and prevents slippage. Show more Show less

  • Exceptional power transfer and no slippage thanks to patented drive roller system.
  • Unique cutting depth up to 400 mm.
  • Reliable Dolmar petrol engine.

PREMIUM*** Table saw blade

TSU***

Materials able to be machined: cellular concrete, sand-lime brick, pumice stone, clay brick, etc. Details: 35-30 mm and 30-25.4 mm reduction bushes are included with disc diameters up to 550 mm. A 60-55 mm reduction bush is supplied with disc diameters of 625 mm and upwards.

  • Universal use
  • Maximum performance and lifetime.
  • Broad product range.

PREMIUM*** Table saw blade

TSU***-Silent

Materials able to be machined: cellular concrete, sand-lime brick, pumice stone, clay brick, etc. Details: 35-30 mm and 30-25.4 mm reduction bushes are included with disc diameters up to 550 mm. A 60-55 mm reduction bush is supplied with disc diameters of 625 mm and upwards.

  • Universal use
  • Maximum performance and lifetime.
  • Broad product range.

PREMIUM*** Table saw blade

F40***

Materials able to be machined: type F40 is designed primarily for refractory cutting.

  • Particularly suitable for refractory cutting
  • Clean cutting edges
  • Maximum performance and lifetime.

PREMIUM*** Table saw blade

TSS10***

Materials able to be machined: type TSS10 has been specially designed for the machining of engineering bricks (e.g. Stradalit). Details: 35-30 mm and 30-25.4 mm reduction bushes are supplied.

  • Specially for the machining of engineering bricks
  • Maximum performance and lifetime.
  • Broad product range.

PREMIUM*** Table saw blade

ES-T***

Materials able to be machined: soft stone, such as marble and sand-lime brick. Details: 35-30 mm and 30-25.4 mm reduction bushes are supplied.

  • For soft materials.
  • Maximum performance and lifetime.
  • Broad product range.

PREMIUM*** Table saw blade

DCT***

Materials able to be machined: ceramic tiles, fine stoneware, porcelain, terrazzo slabs. Details: ultra-thin saw blades with excellent properties. 35-30 mm and 30-25.4 mm reduction bushes are supplied.

  • Chip-free cutting edges
  • Very easy cutting
  • Maximum performance and lifetime.

Tile saw TRE250***

Cutting depth up to 60 mm

Large cutting length for trouble-free cutting of various tile sizes and types. The TRE250*** tile saw enables the cutting of various tile sizes and types to a cutting length of 1 m. A range of adjustment and application options ensure maximum flexibility. The robust design and precise saw head guide guarantee a clean cut. Transport wheels and folding table feet facilitate transport and position at the location of use. Show more Show less

  • Cutting length up to 1 m for cutting large tiles.
  • Clean cuts thanks to precise saw head guide and robust design.
  • Safe and easy transport thanks to folding feet and transport wheels.

Masonry saw TBE350**

Cutting depth up to 110 mm

Uncompromising price-performance ratio. The TBE350** table saw offers an uncompromising price-performance ratio as well as high flexibility through numerous settings and application options. A sturdy saw table with anti-slip support guarantees clean cuts. The swivelling saw head allows mitre cuts to be made with ease. Detachable table feet and transport wheels ensure trouble-free transport. Show more Show less

  • Swivelling saw head enables 45° mitre cuts.
  • Two robust castors ensure total manoeuvrability in the deployment location.
  • Angle stop provided for cuts of 30° to 90°.

Masonry saw TME700***

Cutting depth up to 270 mm

Maximum stability and robustness due to torsional steel chassis. The TME700*** convinces through maximum stability and robustness. The precise stainless-steel saw table guide guarantees a clean cut. Construction-site suitable leading pulleys, forklift guides and a crane hook ensure trouble-free transport. The anti-contamination positioning of the water pump reduces servicing requirements to a minimum and ensures permanent tool cooling. The intelligent blade guard construction enables quick and easy blade installation. Show more Show less

  • Removable water tank for easier cleaning.
  • Sturdy, balanced transport hook for easy crane transport.
  • Precise mitre cutting thanks to mitre stop.

Masonry saw TME1000***

Cutting depth up to 380 mm

Maximum stability and robustness due to torsional steel chassis. The TME1000*** convinces through maximum stability and robustness. The precise stainless-steel saw table guide guarantees a clean cut. Construction-site suitable leading pulleys, forklift guides and a crane hook ensure trouble-free transport. The intelligent blade guard construction enables quick and easy blade installation. Servicing requirements are reduced to a minimum due to low-maintenance saw blade drive via a transmission. Show more Show less

  • Large cutting depths to 380 mm possible (with saw blade Ø 1000 mm).
  • Precise mitre cutting due to mitre stop.
  • Fork lift guides for easy and secure transport.

PREMIUM*** Floor saw blade |Cured concrete

FSC***

Machines up to 15 kW | soft to medium-hard aggregates. Details: Laser welded up to a diameter of 600 mm. Equipped with measuring bore for easy wear control of the segment height. A 35-25.4 mm reduction bush is supplied for saw blades with a 35 mm bore.

  • Universal use

PREMIUM*** Floor saw blade |Cured concrete

FSL***-C | in TGD®-technology

Machines up to 15 kW | soft to very hard aggregates. Details: Laser welded up to a diameter of 1200 mm. Special segment shape with a protective function to guard against premature steel blade wear in the contact zone – (undercutting-effect).

  • Consistently very fast cutting performance and noticeable smooth running.
  • Long lifetime.

PREMIUM*** flap disc

For nonferrous metals

With the specification developed specifically for nonferrous metals, smearing and dulling of the flap disc is prevented. The ceramic grain promotes self-cleaning and sharpening of the disc during material abrasion. This tool offers convenient and high-performance results on difficult-to-grind materials such as aluminium, aluminium bronze, aluminium base alloy, copper, bronze, brass and nickel silver. Show more Show less

  • Reduced costs
  • Enhanced abrasiveness
  • Consistent performance

PREMIUM*** rough grinding wheel

CONFLEX for stainless steel

With the PREMIUM*** CONFLEX the optimum grinding angle is already preset due to the wheel shape. This makes horizontal machine guiding possible, facilitating the user's work. Using the optimal angle makes it possible to achieve consistent wear of the tool and an even surface. This rough grinding wheel is specially designed for stainless steel applications. Show more Show less

  • Enhanced economic efficiency
  • Simple handling
  • Enhanced comfort while working

PREMIUM*** shaft mounted round brushes

For stainless steel

Shaft mounted round brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted wire brushes are suitable for removing rust, cleaning, smoothing, polishing, matting and roughening. Twisted shaft mounted round brushes are designed for welding and removing scale and paint. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

PREMIUM*** Floor saw blade |Cured concrete

FSM***-C | in TGD®-technology

Machines up to 25 kW | hydraulic drives up to 50 kW | soft to very hard aggregates. Details: Laser welded up to a diameter of 1200 mm. Special segment shape with a protective function to guard against premature steel blade wear in the contact zone – (undercutting-effect)

  • Consistently very fast cutting performance and noticeable smooth running.
  • Long lifetime.

PREMIUM*** cut-off wheels

2in1 for steel and stainless steel

This high-performance tool has been designed to be used on both steel and stainless steel and its standard widths offer a cost-efficient solution. This is provided by the longest lifetime and stability of the PREMIUM*** 2in1. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of 2in1 PREMIUM*** cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability. Show more Show less

  • Maximum economic efficiency
  • Universal use
  • Environmentally-friendly

Accessories

For FIBRE DISC

With our PREMIUM*** back up pads you will obtain the best support for the highest demands. Regardless of whether you choose a hard or very hard backing, you can influence the stock removal rate on the workpiece. Thanks to the special design, you will benefit from constant air circulation, preventing heat build-up on the workpiece and the tool.

STANDARD** flap disc

2in1 for steel and stainless steel

The STANDARD** 2in1 flap disc offers two advantages. On one hand it offers the user very long lifetime, on the other it guarantees very good specific abrasion. The TYROLIT 2in1 flap disc is used both on high alloyed steels and stainless steel, as well as on unalloyed and low alloyed steels. Show more Show less

  • Large selection
  • Universal use
  • Ease of use

PREMIUM*** rough grinding wheel

For nonferrous metals

The PREMIUM*** rough grinding wheel developed specifically for nonferrous metals prevents clogging of the tool in order to reduce loading or dulling. Even at very low pressure, the wheel achieves extremely high abrasiveness. TYROLIT's formula and production methods enable exceptionally high stock removal rates to be obtained for nonferrous metal applications. These rough grinding wheels are available in the hard N grade for surface and edge grinding, or in the softer cutting L grade for surface grinding. Show more Show less

  • Consistent performance
  • Chemical purity
  • Lower costs

PREMIUM*** shaft mounted round brushes

For nonferrous metals

Shaft mounted round brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Knotted shaft mounted round brushes are suitable for removing rust, cleaning, smoothing, polishing, matting and roughening. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

PREMIUM*** Floor saw blade |Cured concrete

FSH***-C | in TGD®-technology

Machines up to 50 kW / hydr. >50 kW Universal | soft to very hard concrete aggregates. Details: Laser welded up to a diameter of 1200 mm. Special segment shape with a protective function to guard against premature steel blade wear in the contact zone – (undercutting-effect)

  • Consistently very fast cutting performance and noticeable smooth running.
  • Long lifetime.

PREMIUM*** cut-off wheels

For stainless steel

The chemical purity of this tool is a requirement of machining stainless steel in order to avoid impairments to the material, such as corrosion, pitting corrosion or a reduction in the fatigue strength. The tool is suitable for cutting metal sheets, profiles, pipes, rods and solid material. The assortment of these cut-off wheels ranges from 1.6 to 1.9 mm for quick and convenient operation with the longest lifetime, and from 2.5 to 3.0 mm for the longest lifetime and stability. Show more Show less

  • Maximum economic efficiency
  • Stainless steel specialist
  • Environmentally-friendly

Accessories

For FIBRE DISC

The BASIC* back up pad is a good supplement to all our fibre discs. The accessories offer good support in achieving the best results for the surface finish.

PREMIUM*** rough grinding wheel

T-GRIND for steel and cast iron

The PREMIUM*** T-GRIND has been developed for the high demands exerted when using turbine and vane-type pneumatic grinders. The long lifetime ensures this rough grinding wheel provides a vast reduction in abrasive waste, making it an environmentally-friendly product. At the same time, the aggressive stock removal rate ensures more comfort and relief for the user while working. Show more Show less

  • Cost-effective
  • High productivity
  • Highest demands

PREMIUM*** shaft mounted round brushes

For universal use

Shaft mounted round brushes are ideal for machining hard-to-reach parts. With this product you will obtain a tool that can be used on both straight grinders and drilling machines. Shaft mounted round brushes with silicon carbide are very hard and thus enable very high stock removal rates. Their use includes deburring work on various workpieces made of practically any material, such as steel, aluminium, stainless steel, copper, brass, etc. In addition, silicon carbide is used for wood structuring. Show more Show less

  • Broad assortment
  • Less work required
  • Powerful tool

PREMIUM*** Floor saw blade |Cured concrete

FSX***-C3 | in TGD®-technology

Machines from 50 kW / hydr. >75 kW Universal | soft to very hard concrete aggregates. Details: Laser welded up to a diameter of 1200 mm. Special segment shape with a protective function to guard against premature steel blade wear in the contact zone – (undercutting-effect)